AC Distributor GooglePlus
Flags
Flags
Facebook

Diverter Boxes

Diverter Box and Adapter This diverter box system is designed to be used below the drill table and accommodates tripping in and out of the hole without removal.

The main wear plate, below the wiper rubber, is made from Formalloy 400 steel, which is extremely wear resistant. The diverter with two additional adapters will handle 10", 8", and 6" casing.

Main Diverter for use with 10 3/4" OD Casing
 
Adapter for use on 8 5/8" OD Casing
Overall height
14"
Overall height of 8" adapter
7"
Discharge
6"
Added height of entire assembly when installed
3 1/2"
Base outside diameter
11 7/8"
Base outside diameter
9 5/8"
Base inside diameter
11"
Base inside diameter
8 3/4"
Back to front discharge
18"
 
Base to bottom of seal
10 1/2"
Base to centerline of discharge
6 1/2"
Overall width with welded-on arms
18"
Adapter for use on 6 5/8" OD Casing
Top hole opening
5"
Overall height of 6" adapter
7"
Base to centerline of lock screws
1 3/4"
Added height of entire assembly when installed
3 1/2"
Seal style
Tapered
Base outside diameter
7 1/2"
Net weight
150 lbs.
Base inside diameter
6 3/4"
Diverter box, top removed, with adapters
Diverter box, top removed, with Adapters


Diverter box, top attached, with Adapters
Diverter box, top attached, with Adapters

Diverter box with Adapters
Diverter box with Adapters
Upward view of Diverter box
Upward view of Diverter box

Store Link

info

Blue line

Related Products