AC Distributor GooglePlus
Flags
Flags
Facebook

Pneumatic Breakers, Chipping Hammers, and Rock Drills

New Horizons for Individual Productivity

Atlas Copco's range of pneumatic breakers incorporates a number of ergonomic features.

Spring-dampened handles prevent as much as 80% of the vibrations from reaching the operator, thus minimizing the risk of "white finger" -- loss of feeling in the hands caused by damage to nerve cells.

Atlas Copco breakers are equipped with silencers in which compressed air pulsations are dampened gradually, cutting noise emissions by up to 50%. This drastically reduces the risk of hearing damage when operating the tools for long periods.

High power-to-weight ratios mean that tool operation demands less physical effort.

Add Atlas Copco's quality and reliability and you have a range of tools that reduces operator fatigue and health risks while offering a level of individual productivity you never thought possible.

Pneumatic breakers, chipping hammers, and rock drills

New Levels of Reliability

The new TEX breakers represent a technological leap forward. They are constructed from a one-piece, solid-cast housing, which completely eliminates the need for frontheads, four-bolt backheads, and sidebolts. This means thirty percent fewer parts than in traditional breakers. And fewer parts mean fewer breakdowns.

TEX series cutawayMinimal parts inventory - All but three parts in the TEX P60 and TEX P90 are interchangeable, so your spare parts inventory can be kept to a minimum.

Easy to service - The new TEX series has been designed for fast and exceptionally easy on-site service. A hammer and punch are all you need for virtually any service task, wherever you are.

Reduced wear - The anvil block, a tried and tested feature from earlier models, not only reduces wear on the piston and cylinder, but also helps to keep dirt out of the hammer mechanism. The block allows use of both US and European standard size chisels.

Air-cushioned action - TEX breakers feature air-cushioned piston return. This means less vibration during back hammering and blank hammering, which reduces stress on man and machine.

Full-shift lubricator - The built-in lubricator ensures efficient lubrication to minimize tool wear. It is easily accessible, accepts both mineral and synthetic oils, and holds enough oil for an entire shift.

Cutting-edge design technology

 

The revolutionary TEX series was made possible with the help of some of the most sophisticated 3-D design programs available.

 

Long before any metal was actually cut, the software allowed the design team to fully visualize the structure in three-dimensional virtual reality.

TEX series - Trigger, Swivel, and Solid Body

Trigger

The innovative SOFSTART two-step trigger gives you full chisel control.

Swivel

The swivel coupling rotates easily, even when pressurized.

Solid body

The one-piece solid housing means fewer parts for greater reliability.

Ergonomic Pneumatic Breakers - TEX PE Series

TEX PE - makes light of the heaviest jobs

Highly efficient silencing and vibration dampening systems make TEX PE machines comfortable to operate and the most productive choice for demanding jobs.

The ergonomic design of the machines in the TEX PE series, including HAPS® (Atlas Copco's Hand-Arm Protection System), means they can be used for prolonged periods with minimum risk to the operator's health.

TEX PE

Model
Tool Shank
(in.)
Weight
(lbs.)
Air Consumption
(CFM)
Length
(in.)
Impact Frequency
(blows/min.)
TEX 15PE
1" x 4 1/4"
40
53
23
1470
TEX 19PE
1" x 4 1/4"
51
55
24
1470
TEX 28PE
1 1/8" x 6"
71
68
28
1230
 
1 1/4" x 6"
71
68
28
1230
TEX 33PE
1 1/8" x 6"
81
74
29
1200
 
1 1/4" x 6"
81
74
29
1200
TEX 40PE
1 1/8" x 6"
93
83
30
1110
 
1 1/4" x 6"
93
83
30
1110
Data at 90 psi air pressure.

New Levels of Performance

When we set out to reinvent the paving breaker, we focused on two key factors: performance and reliability.

The result is a new line of breakers, the TEX P60 and TEX P90. Not only are they among the most powerful in their class, but they are also the most reliable.

Most powerful - The TEX was designed for contractors who rate hitting power and productivity as top purchase criteria. The P90 has the largest hammer piston in the industry, more than 15% heavier than its nearest rival, while the P60's high blow frequency makes it ideal for cutting asphalt and concrete.

Controlled power - And yet this raw power is easy to control. Thanks to the exclusive SOFSTART two-step trigger, the operator can begin to hammer slowly, setting the chisel where it's needed, without a lot of wasted effort.

Easy to maneuver - With their low center of gravity, the new breakers are well balanced and easy to handle. A unique swivel coupling, which rotates even when pressurized, makes the TEX still easier to maneuver.

Optional muffler - The muffler, available as an option, significantly reduces the noise level. Its slim design gives an unrestricted view of the work for maximum control.

Model
Tool Shank
(in.)
Weight
(lbs.)
Air Consumption
(CFM)
Length
(in.)
Impact Frequency
(blows/min.)
TEX 14PS
1" x 4 1/4"
33
53
22.6"
1470
 
7/8" x 3 1/4"
33
53
22.6"
1470
TEX 18PS
7/8" x 3 1/4"
44
55
24
1470
 
1" x 4 1/4"
44.1
55.1
24.2"
1470
 
1 1/8" x 6"
44.1
55.1
24.2"
1470
TEX P60
1 1/8" x 6"
68
76
27 1/4"
1500
 
1 1/4" x 6"
68
76
27 1/4"
1500
TEX P60S
1 1/8" x 6"
73
76
27 1/4"
1500
 
1 1/4" x 6"
73
76
27 1/4"
1500
TEX P90
1 1/8" x 6"
88
85
28"
1260
 
1 1/4" x 6"
88
85
28"
1260
TEX P90S
1 1/8" x 6"
93
85
28"
1260
 
1 1/4" x 6"
93
85
28"
1260
Data at 90 psi air pressure.

Pick Hammers

Low weight - high productivity...

Fitted with D-type handles, machines in the TEX 09, 11, and 12 series are the lightest and most productive medium-weight pick hammers in their class.

...with the reliability you need

TEX 09, 11, and 12 pick hammers are extremely reliable machines. Available in a variety of models, they go on giving the same high level of performance under the toughest conditions.

TEX 09 ps and TEX 12 PSK

PSK = equipped with kick-latch type tool retainer for quick and easy tool changing.
PSK description
PS = equipped with threaded, cap-type tool retainer for more comfortable hand grip when performing horizontal tasks.
PS description
TEX 09 PS
TEX 12 PSK

Model
Tool Shank
(in.)
Weight
(lbs.)
Air Consumption
(CFM)
Length
(in.)
Impact Frequency
(blows/min.)
Tool Retainer
TEX 09PS
7/8" x 3 1/4"
21
39
20
1800
C
TEX 09PSK
7/8" x 3 1/4"
23
39
21
1800
K
TEX 12PSK
7/8" x 3 1/4"
27
21
21
1600
K
S = Silenced

Chipping Hammers

Smaller Tools for Lighter Jobs

TEX 3 and 05 are the ideal choice for a wide variety of lighter chipping and scaling jobs.

They are particularly suitable for renovation and structural alteration work, including chipping concrete, roughening surfaces, hole making, chasing, and trimming various materials.

TEX 3

Model
Tool Shank
(in.)
Weight
(lbs.)
Air Consumption
(CFM)
Length
(in.)
Impact Frequency
(blows/min.)
TEX 3
3/4" x 2"**
8
15
12
4080
TEX 05P
3/4" x 2"**
12
20
15
2760
TEX 05PH
.580"***
12
20
15
2760
TEX 05PR
.680"*
12
20
15
2760
*round shank
**hexagonal shank
***.580 hexagonal shank
Use round collar with all tools listed above.

TEX 05

Optional Equipment

  • Hose nipple with seal for 1/2" hose
  • Whip Hose 1/2" x 6' with claw coupling and hose nipple

The TEX 12 is a new, versatile tool in the Atlas Copco pick hammer range. It combines high productivity with low weight to make it a champion in the medium-weight class.

The reliability of TEX 12 is building on many years of successful experience from earlier models. We now introduce new features that make it more hard hitting and at the same time easier to position.

SOFSTART Trigger

The TEX 12 comes with a special two-step trigger that makes the job easier by giving you full chisel control.

Chipping Hammers

TEX 317, 318, 319, and 419 are powerful chipping hammers equipped with rugged handles.

Designed to provide years of trouble-free service, these hammers are equipped with oil-resistant neoprene exhaust deflectors and available for your choice of .580 hex or .680 round bushings.

Optional ball retainer is available on TEX 317, 317D, 319, and 419 models.

TEX 419, TEX 317, TEX 317D

Optional Equipment

  • Whip Hose 1/2" x 6' with swivel
  • Ball retainer

Model
Tool Shank
(in.)
Weight
(lbs.)
Air Consumption
(CFM)
Length
(in.)
Impact Frequency
(blows/min.)
Standard Chipping Hammers
TEX 317 .680 Round
17
32
15
2200
  .580 Hex
17
32
15
2200
TEX 317D .680 Round
17
36
15.25
2200
  .580 Hex
17
36
15.25
2200
Standard Chipping Hammers with Screw Cap Retainers
TEX 318 .680 Round
18
32
16
2200
  .580 Hex
18
32
16
2200
TEX 318D .680 Round
18
36
16
2200
  .580 Hex
18
36
16
2200
4-Bolt Chipping Hammers
TEX 319 .680 Round
19
32
15.25
2200
  .580 Hex
19
32
15.25
2200
TEX 419 .680 Round
19
36
16
1800
  .580 Hex
19
36
16
1800
Use oval collar with 317, use round collar with 318.

Rivet Busters

Fitted with "D" type handles, the TEX 626, 830, and 1133 hammers are tough, powerful tools designed for heavy demolition work.

Their long stroke and high impact energy, coupled with the ergonomics of the rivet buster valve, make them ideal for extended demolition use.

TEX 830

Model
Tool
Shank
Weight
(lbs.)
Air Consumption
(CFM)
Length
(in.)
Impact Frequency
(blows/min.)
TEX 626R
Jumbo
26
42
20.5
1200
TEX 830R
Jumbo
30
44
22.5
1140
TEX 1133R
Jumbo
33
50
25.5
850

Optional Equipment

  • Whip Hose 1/2" x 8' with shutoff for TEX 626, 830, and 1133

Backfill Tamper

The TEX 640 backfill tamper is designed to efficiently compact loose backfill material around utility poles and foundations as well as backfilling trenches and road repairs. High blows per minute means that base material is compacted quickly and efficiently. The TEX 640 features a built-in lubricator which allows for the correct amount of oil during operation. An adjustable packing nut allows for proper readjustment as the packing set wears.

Model
Weight
(lbs.)
Air Consumption
(CFM)
Length
(in.)
Impact Frequency
(blows/min.)
TEX 640
40
38.5
48.25
800

Optional Equipment

  • Pole butt
  • Aluminum butt 3"
  • Aluminum butt 4"
TEX 640

Ergonomic Scaler

TEX 117 Ruggedly built, the TEX 117 is a low maintenance, long reach scaler perfect for many surface cleaning operations. Using a variety of standard accessories, the operator can chip concrete, grout, caulking or remove tiles, mastic, paint, and roofing materials.
The ergonomic long reach scaler reduces time-consuming hand scraping and back-breaking labor; it is economical to use, consuming only 7 cfm, and can operate from a small portable compressor.

Model
Description
Weight
(lbs.)
Air Consumption
(CFM)
Length
(in.)
Impact Frequency
(blows/min.)
TEX 117
Floor Scraper
17
7
70
2300
Includes 4" wide chisel.

Rugged, powerful.

Reliability you can count on...

Efficient, powerful, dependable. Atlas Copco's range of pneumatic drills is the preferred choice for utility companies, general contractors, quarries, and the dimension stone industry the world over.

Whatever the application, our low maintenance rock drills give you the ultimate in power and performance to get the job done.

Our hand-held drills combine lightweight, compact design with powerful output energy for easy-handling and optimum efficiency. And high power-to-weight ratios mean maximum productivity.

Atlas Copco offers powerful, ergonomic drills, equipped with silencers and vibration dampened handles, for superior operator comfort and safety -- and increased productivity.

For high performance and reliability you can count on, choose Atlas Copco rock drills.

Pneumatic Tool cutaway

1 - Spring-dampened handles reduce the vibration transmitted into the operator's hands by 75%.

2 - Stepless throttle for gentle starting.

3 - Extra flushing increases drilling efficiency.

4 - Effective silencer in impact- and wear-resistant polyurethane reduces the noise level by more than 50%.

5 - Kick-latch retainer makes drill steel changing fast and easy.

Ergonomic Rock Drills

RH 572E

RH 572E

BBD 15E
BBD 15E

For improved safety and increased productivity!

The ergonomically designed BBD 15E and RH 572E, medium-weight rock drills with very high power-to-weight ratios, provide optimum operational safety and productivity. These low-maintenance drills have high impact energy in relation to weight and ergonomic features that improve operator comfort.

Reduced noise and vibration levels

The BBD 15E and RH 572E are equipped with spring-dampened handles and highly effective silencers. The result is reduction in vibration levels transmitted to the operator's hands by more than 75% and reduction of low-frequency noise levels by 7 dB(A), or more than 50%. Operator fatigue is minimized, raising productivity.

Choose the right machine

The RH 572E has rifle-bar rotation, with slower rotation and lower impact frequency, for drilling in hard rock. This drill is ideal for minor bench drilling and other rock drilling applications, such as secondary drilling.

The lighter BBD 15E has ratchet-wheel rotation with faster rotation and higher impact frequency, for drilling in soft to medium-hard rock. The BBD 15E is designed for concrete drilling, drilling for smooth blasting and seam drilling -- all of which require a high-performance, lightweight, easy-to-handle drill.


Model
Weight
(lbs.)
Air
Req.
(CFM)
Length incl. Drill-Steel Retainer
(in.)
Drill-Steel
Chuck
(hex)

(in.)
Impact
Freq.
(blows/
min.)
Rotation
Speed
(r/min.)
Penetration
Rate
(in./min.)
Hose
Connection
(in.)
BBD 15E
34
47
22 3/4"
3/4" x 4 1/4"
2520
220
8 3/4*
5/8"
 
34
47
22 3/4"
7/8" x 3 1/4"
2520
220
8 3/4*
3/4"
 
34
47
22 3/4"
7/8" x 4 1/4"
2520
220
8 3/4*
5/8"
BBD 15ET***
34
47
22 3/4"
7/8" x 4 1/4"
2520
220
8 3/4*
5/8"
RH 572E
50
79
23"
7/8" x 4 1/4"
2040
170
10 1/4**
3/4"
    *Drilling in granite with 1 1/8", chisel-type integral drill-steel (working at 90 psi)
 **
Drilling in granite with 1 1/4", chisel-type integral drill-steel (working at 90 psi)
***Lever-operated throttle control.

Medium-Weight Rock Drills

Power that's easy to handle

The high power-to-weight ratios and compact, versatile designs of the RH 571 and RH 658 rock drills enable simple positioning and easy handling. And their high penetration rate means you get the job done quickly, for maximum productivity.

RH 571-5L
RH 571-5L

RH drills are designed for bench drilling, secondary drilling, and drilling for smooth blasting. Because of its light weight, the RH 571 is most suited for smaller jobs. The more powerful and slightly heavier RH 658 provides a higher drilling rate and can handle depths up to 20 feet.

Extra flushing and kick-latch retainers

The extra flushing air valve is a special feature that provides simple, rapid cleaning of the drill hole for increased operational efficiency. To simplify the changing of drill steels, the drills are designed with a robust kick-latch type retainer that locks the drill steel into position. Both machines have rifle-bar rotation, with slower rotation and high impact energy, perfect for drilling in hard rock. They are also equipped with T-handles for a solid, comfortable grip.

  RH 658L
RH 658L


Model
Weight
(lbs.)
Air
Req.
(CFM)
Length incl. Drill-Steel Retainer
(in.)
Drill-Steel
Chuck
(hex)

(in.)
Impact
Freq.
(blows/
min.)
Rotation
Speed
(r/min.)
Penetration
Rate
(in./min.)
Hose
Connection
(in.)
RH 571-5L
39
83
20
7/8" x 4 1/4"
2100
190
11 5/8"*
3/4"
RH 571-5LS
42
83
20
7/8" x 4 1/4"
1980
190
10 7/8"*
3/4"
RH 658L
53
123.5
22 1/4"
7/8" x 4 1/4"
2040
215
16 3/4"*
3/4"
RH 658L
53
123.5
22 1/4"
1" x 4 1/4"
2040
215
16 3/4"*
3/4"
RH 658LS
55
123.5
22 1/4"
7/8" x 4 1/4"
2040
215
16*
3/4"
*Drilling in granite with 1 1/4", chisel-type integral drill-steel (working at 90 psi)

Light Rock Drills

BBD 12DS and BBD 12TS

Combining power and maneuverability

The lightweight BBD 12 hand-held rock drill is the perfect partner in a wide variety of applications where the maneuverability and easy handling are important. Available in two models, one for horizontal drilling and one for vertical-down drilling, the BBD guarantees powerful, reliable, and flexible operation.

Equipped with a D-type handle, the BBD 12D is ideal for horizontal drilling, plug hole drilling, and drilling in concrete to a maximum depth of 3 feet.

For vertical-down drilling to 10 feet in depth, Atlas Copco offers the BBD 12T, fitted with a T-type handle, slightly angled to provide the best grip. The BBD 12T is perfect for concrete drilling, drilling for smooth blasting, and seam drilling. All BBD models are equipped with kick-latch type drill-steel retainers for quick and easy steel changing.


Model
Weight
(lbs.)
Air
Req.
(CFM)
Length incl. Drill-Steel Retainer
(in.)
Drill-Steel
Chuck
(hex)

(in.)
Impact
Freq.
(blows/
min.)
Rotation
Speed
(r/min.)
Penetration
Rate
(in./min.)
Hose
Connection
(in.)
Horizontal
BBD 12D
22
51.1
22 1/4"
3/4" x 4 1/4"
2580
220
10*
5/8"
BBD 12DS
24
46.9
22 1/4"
3/4" x 4 1/4"
2520
220
8*
5/8"
Vertical-down
BBD 12T-01
24
51.1
20"
7/8" x 4 1/4"
2580
220
6**
5/8"
BBD 12TS-01
27
46.9
20"
7/8" x 4 1/4"
2520
220
6**
5/8"
  *Drilling in granite with 1 1/8", chisel-type integral drill-steel (working at 90 psi)
**Drilling in granite with 1 1/4", chisel-type integral drill-steel (working at 90 psi)

Lightweight Drill/Chipper

Lightweight Drill/ChipperLight, versatile, an outstanding performer

The DKR 36 is a lightweight, versatile machine designed for use on construction sites and in stone-cutting shops.

This powerful, compact drill/chipper is the perfect choice for drilling plug holes from 5/16" to 1-1/8" in diameter and up to 12" in depth in concrete floors, walls, and roofs for pipe cable and ventilation duct installation. The DKR 36 is also used in drilling wedge holes for rock splitting.

Chipping and scaling

The DKR 36 is also a highly efficient tool for general chipping and scaling work. Changing from a drilling steel to a chipping tool automatically switches the tool to the chipping function. The DKR 36 has a built-in lubricator for easy maintenance and a quick-coupling hexagonal or cylindrical chuck that ensures rapid, simple tool change.

Model
Weight
(lbs.)
Air
Req.
(CFM)
Length
(in.)
Impact
Freq.
(blows/
min.)
Rotation
Speed
(r/min.)
Penetration
Rate
(in./min.)
Shank
(in.)
Hose
Connection
(in.)
DKR 36
10
21.3
14 3/4"
2820
250
7.1*
.580" x 3 1/2"**
3/4"
DKR 36R
10
21.3
14 3/4"
2820
250
7.1*
3/4" x 3 1/4"***
3/4"
*3/4" drill in granite at 90 psi **hexagonal shank ***round shank
     

Vibration Reducing Gloves

Atlas Copco's gloves reduce a machine's vibration to the operator.

They provide a perfect fit and are available in a variety of weights for warm or cold weather protection.

Gloves

Gloves

  • Vibration Reducing XL, XXL
  • Polar Gard Vibration Reducing L, XL
  • Summer Vibration Reducing L, XL

Mantex Hose


Description



Length



Weight



I.D.


Mantex Hose

Lightweight Air Hose
Heavy-Duty Construction

50 ft.
8 lbs.
1"

Lightweight Air Hose
Heavy-Duty Construction

50 ft.
5.4 lbs.
3/4"
       

Mantex compressed air hose is a new concept. Mantex has an extremely low weight -- 1/3 that of a conventional hose. It has a lay-flat construction and is flexible at all temperatures. This means that Mantex has exceptionally good handling benefits. Ideal where mobility is necessary and under difficult working conditions. Mantex is made from a woven, synthetic textile embedded in oil resistant rubber by a special extrusion process.

DCT Dust Collector


For improved efficiency...

Dust-free working environment

Dust generated by drilling obscures vision and poses a health risk. The DCT dust collector keeps the working environment free of dust during drilling and can be used with the entire range of Atlas Copco pneumatic hand-held drills. Drilling rates also rise since the drill cuttings are continuously removed.

The DCT dust collector works on the ejector principal, which creates an underpressure throughout the filter system. Since the ejector is built into the filter unit, it cannot be damaged by external influences or by drilling dust.


 

Model
Max. air
Pressure
(psi)
Ejector Air
Req.
(CFM)
Suction
Capacity
(CFM)
Filter
Area
(ft.2)
Weight
Complete
(lbs)
Suction
Hose
(in.)
DCT 10
100
20
100
14
48
1 1/2"

...and increased productivityOperator's Handbook

Operator's Handbook

The Operator's handbook will help you get the most out of Atlas Copco pneumatic breakers and drills. The handbook provides useful information for safe, effective operation and tips to maximize service life. Topics covered include good operating practices, choosing the right tool, and general maintenance requirements.

Accessories brochure

Atlas Copco

Atlas Copco offers a comprehensive range of high quality, forged steel accessories for breakers, chipping hammers, busters, and rock drills at very competitive prices.

Atlas Copco Means Quality and Experience

Man with Rock DrillAtlas Copco is a leading manufacturer of high quality machines for construction and demolition. Our products are sold and serviced through the Atlas Copco organization, which has subsidiaries in more than 60 countries and a network of experienced local distributors in other markets.

Atlas Copco's business philosophy is simple -- to enhance our customers' productivity and profitability by designing machines that combine high performance and mechanical reliability with the best ergonomic features possible. We strive to set new standards in the industry by always considering the impact of machinery on the environment and minimizing operator health risks and fatigue.

Atlas Copco pneumatic breakers, chipping hammers, busters, and hand-held rock drills

Atlas Copco's range of powerful, rugged tools provides total reliability and performance. The advanced ergonomic tools are designed for low maintenance and maximum operator safety and comfort. Whatever the application, you can rest assured that Atlas Copco tools will increase the efficiency and productivity of your operations.

Everything you need

Atlas Copco offers a wide range of construction tools, from concrete crushers and pulverizers to hydraulic breakers, pneumatic breakers, pick- and chipping hammers, rock drills and accessories, and electric rotary and demolition hammers. Our expertise is reflected in the versatility of our machines and the power sources they employ -- hydraulic oil, compressed air, electricity, or gas. We choose the medium that best suits the application.

The precision manufacturing and attention to detail that go into every Atlas Copco tool guarantees low operating costs, very low maintenance requirements, and maximum productivity.

AWDS logo