AC Distributor GooglePlus
Flags
Flags
Facebook

Drilling Drives and Anchor Drives

The Revolution Series Drives are designed to outfit several different types of equipment. This selection guide will assist you in selecting the right model for your equipment type.

Drilling Drive "D" Series table

Anchor Drive "R" Series table

Application
Connection
Excavator
Model
Drilling
R-256
Skid Mount
Drilling
H-200
Skid Mount
Drilling
R-256
Skid Mount
Drilling
H-200
Skid Mount
Drilling
R-256
2T-3T
Drilling
H-200
2T-3T
Drilling
H-200
2T-4T
Drilling
H-250
5T-8T
Drilling
H-300
17T-25T
Drilling
H-300
20T-30T
Drilling
S-400
20T-30T
Drilling
S-130
20T-30T
Anchor
H-200
N/A
Anchor
H-200
5T-8T
Anchor
H-250
11T-17T
Anchor
H-250
8T-13T
Anchor
H-250
11T-17T
Anchor
H-300
20T-30T
Anchor
S-400
20T-30T
Anchor
S-130
20T-30T
Anchor
S-150
30T-40T
Anchor
S-177
60T-90T
Anchor
S-177
90T-150T
Anchor
S-200
90T-150T

Features

  • Large highly efficient gearboxes, designed specifically for long duty cycles.
  • Standard cross-over pressure relief systems to protect the motor from pressure spikes.
  • Two-piece bail housing design allows top section to be removed for easy motor access.
  • Single and Two-speed models do not require drain lines.
  • All models are designed to be outfitted with the TruLink torque monitoring system.
  • All two-speed models are equipped with a pressure-activated auto shift feature.
  • Accurate torque and speed specifications. The manufacturer ensures that all torque and speed specifications have maximum efficiencies applied to provide the most accurate specifications possible. None of the specifications are listed at 100% theoretical values.

Complete Drive Package Includes

  • Mounting Brackets for Skid Loaders, Backhoe Loaders, Excavators (Compact and Large).
  • Anchor drive tool adapters.
  • RevTrak digital torque monitoring system.

Applications

  • Anchoring: The RS, RT, and RV models are designed specifically for the anchor installation industry. The high torque and slow speed configuration is ideal for anchor applications.
  • Drilling: The DS, DT, and DV series are ideal for various types of drilling applications. Torque ranges from 2,500 ft/lb to 40,000 ft/lb.

 

Revolution Series logo

Revolution Series Drive cutaway





MS-100 / Single Speed unit and da

Features

  • Compact Size
  • Universal Compact Skid Mount included
  • Hydraulic Hoses included

Accessories

  • Double Swivel Bracket Assembly
  • Pin Assembly 7/8"

MS-100 / Single Speed

Model
Connection
Swivel Type
MS-100
R-256
Single
MS-100
R-256
Double
MS-100
H-200
Single
MS-100
H-200
Double
 

Total Unit Weight
146 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure (psi)
Torque (ft/lbs)
Displacement 6.1 cu/in
1600
613
Motor Type Single Speed Bi-Directional
1800
689
Motor Output Shaft 7/8" Spline 14T
2000
766
Motor Mount SAE - A 2 Bolt
2200
842
Motor Ports 1/2" BSP
2400
919
Cross-Over Pressure Relief Not Equipped
2600
995
Planetary Gearbox Information
2800
1073
Gearbox Type Planetary Single Stage
3000
1149
Reduction Ratio 5.77:1
Output Shaft 2" Hex or 2 9/16" Round
Reference Speed Chart
Oil Capacity .31 Gallons
Flow (gpm)
Speed (rpm)
Oil Type SAE 80W90 GL-5
10
54
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.
15
80
20
108
25
134
Manufacturer's Efficiency Statement

MS-125 / Single Speed

Features

  • Compact Size
  • Universal Compact Skid Mount included
  • Hydraulic Hoses included

Accessories

  • Double Swivel Bracket Assembly
  • Pin Assembly 7/8"

MS-125 / Single Speed

Model
Connection
Swivel Type
MS-125
R-256
Single
MS-125
R-256
Double
MS-125
H-200
Single
MS-125
H-200
Double
 

Total Unit Weight
146 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure (psi)
Torque (ft/lbs)
Displacement 7.3 cu/in
1600
736
Motor Type Single Speed Bi-Directional
1800
827
Motor Output Shaft 7/8" Spline 14T
2000
919
Motor Mount SAE - A 2 Bolt
2200
1011
Motor Ports 7/8" 14 O-Ring
2400
1103
Cross-Over Pressure Relief Not Equipped
2600
1195
Planetary Gearbox Information
2800
1287
Gearbox Type Planetary Single Stage
3000
1378
Reduction Ratio 5.77:1
Output Shaft 2" Hex or 2 9/16" Round
Reference Speed Chart
Oil Capacity .31 Gallons
Flow (gpm)
Speed (rpm)
Oil Type SAE 80W90 GL-5
10
45
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.
15
67
20
90
25
112
Manufacturer's Efficiency Statement

Application
Connection
Excavator

DS-2 / Single Speed unit

Drilling
H-200
2T-3T
Drilling
R-256
2T-3T

Accessories

  • Universal Mounting Plate for Skid-Skeer
  • Long Reach Universal Mount for Skid-Skeer
  • TruLink Class 1 4" Monitor
  • TruLink Class 1 8" Monitor
  • Link Arm 45mm
  • Pin Assembly 45mm
DS-2 / Single Speed diagram

DS-2 / Single Speed - Specifications

Total Unit Weight
115 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure (psi)
Torque (ft/lbs)
Displacement 12.5 cu/in
1600
1256
Motor Type Single Speed Bi-Directional
1800
1413
Motor Output Shaft 7/8" Spline 14T
2000
1570
Motor Mount SAE - A 2 Bolt
2200
1728
Motor Ports 1/2" BSP
2400
1884
Cross-Over Pressure Relief Not Equipped
2600
2042
Planetary Gearbox Information
2800
2198
Gearbox Type Planetary Single Stage
3000
2356
Reduction Ratio 5.77:1
Output Shaft 2" Hex or 2 9/16" Round
Reference Speed Chart
Oil Capacity .31 Gallons
Flow (gpm)
Speed (rpm)
Oil Type SAE 80W90 GL-5
10
26
Shaft Pull Out (lbs.) 3,000 lbs.
15
39
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.
20
52
25
66
 
Manufacturer's Efficiency Statement

Application
Connection
Excavator

DS-3 / Single Speed unit

Drilling
H-200
2T-4T

Accessories

  • Universal Mounting Plate for Skid-Skeer
  • Long Reach Universal Mount for Skid-Skeer
  • TruLink Class 1 4" Monitor
  • TruLink Class 1 8" Monitor
  • Link Arm 45mm
  • Pin Assembly 45mm
DS-3 / Single Speed diagram

DS-3 / Single Speed - Specifications

Total Unit Weight
170 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure (psi)
Torque (ft/lbs)
Displacement 8.0 cu/in
1600
2058
Motor Type Single Speed Bi-Directional
1800
2315
Motor Output Shaft 1" 6B Spline
2000
2572
Motor Mount SAE - A 2 Bolt
2200
2830
Motor Ports 7/8" - 14 O-Ring
2400
3087
Cross-Over Pressure Relief Not Equipped
2600
3344
Planetary Gearbox Information
2800
3601
Gearbox Type Planetary Two Stage
3000
3859
Reduction Ratio 14.79:1
Output Shaft 2" Hex
Reference Speed Chart
Oil Capacity .87 Gallons
Flow (gpm)
Speed (rpm)
Oil Type SAE 80W90 GL-5
10
16
Shaft Pull Out (lbs.) 7,000 lbs.
15
24
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.
20
32
25
40
 
Manufacturer's Efficiency Statement

Application
Connection
Excavator

DT-5 / Two Speed unit

Drilling
H-250
5T-8T

Accessories

  • Universal Mounting Plate for Skid-Skeer
  • Long Reach Universal Mount for Skid-Skeer
  • TruLink Class 1 4" Monitor
  • TruLink Class 1 8" Monitor
  • Link Arm 45mm
  • Pin Assembly 45mm
DT-5 / Two Speed diagram

DT-5 / Two Speed - Specifications

Total Unit Weight
645 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 2.98 cu/in
Motor Type Two Speed Bi-Directional
1600
2629
1314
Motor Output Shaft 1 1/4" Spline 14T
1800
2958
1478
Motor Mount SAE - C 4 Bolt
2000
3287
1643
Motor Ports 1 5/8" - 12 UN-2B
2200
3615
1807
Cross-Over Pressure Relief Set @ 3100 psi
2400
3943
1971
Planetary Gearbox Information
2600
4272
2136
Gearbox Type Planetary Two Stage
2800
4601
2300
Reduction Ratio 25.36:1
3000
4930
2465
Output Shaft 2 1/2" Hex
Reference Speed Chart
Oil Capacity 1.7 Gallons
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 22,500 lbs.
20
25
50

2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

25
31
63
30
38
75
35
44
88
40
50
100
Manufacturer's Efficiency Statement

Application
Connection
Excavator
DT-15 / Two Speed unit
Drilling
H-300
17T-25T

Accessories

  • TruLink Class 1 4" Monitor
  • TruLink Class 1 8" Monitor
  • Link Arm 45mm
  • Pin Assembly 45mm
DT-15 / Two Speed diagram

DT-15 / Two Speed - Specifications

Total Unit Weight
825 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 17.8 cu/in
Motor Type Two Speed Bi-Directional
1600
8254
4127
Motor Output Shaft 1 1/4" Spline 14T
1800
9287
4643
Motor Mount SAE - C 4 Bolt
2000
10,318
5159
Motor Ports 1 5/8" - 12 UN-2B
2200
11,350
5674
Cross-Over Pressure Relief Set @ 3100 psi
2400
12,382
6191
Planetary Gearbox Information
2600
13,414
6707
Gearbox Type Planetary Two Stage
2800
14,445
7223
Reduction Ratio 26.52:1
3000
15,478
7738
Output Shaft 3" Hex
Oil Capacity 2.4 Gallons
Reference Speed Chart
Oil Type SAE 80W90 GL-5
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Shaft Pull Out (lbs.) 22,500 lbs.

2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

20
8
16
30
12
24
40
16
32
50
20
40
Manufacturer's Efficiency Statement

Application
Connection
Excavator
DV-20 / Variable Speed unit
Drilling
H-300
20T-30T

Accessories

  • TruLink Class 1 4" Monitor
  • TruLink Class 1 8" Monitor
  • Link Arm 45mm
  • Pin Assembly 45mm
DV-20 / Variable Speed diagram

DV-20 / Variable Speed - Specifications

Total Unit Weight
880 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 8.25 cu/in
Motor Type Var. Speed Bi-Directional
2600
14,629
8669
Motor Output Shaft 8/16 Spline 13T
2800
15,755
9336
Motor Mount SAE - D 2 Bolt
3000
16,880
10,003
Motor Ports Radial (Quick Coupler)
3200
18,006
10,670
Cross-Over Pressure Relief None
3400
19,131
11,336
Planetary Gearbox Information
3600
20,256
12,004
Gearbox Type Planetary Three Stage
3800
21,382
12,671
Reduction Ratio 60.56:1
4000
22,507
13,337
Output Shaft 3" Hex
Reference Speed Chart
Oil Capacity 2.6 Gallons
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 45,000 lbs.
40
16
27

VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

45
18
30
50
20
33
55
22
37
60
24
40
Manufacturer's Efficiency Statement

Application
Connection
Excavator
DV-30 / Variable Speed unit
Drilling
S-400
20T-30T

Accessories

  • TruLink Class 1 4" Monitor
  • TruLink Class 1 8" Monitor
  • Link Arm 75mm
  • Pin Assembly 75mm
DV-30 / Variable Speed diagram

DV-30 / Variable Speed - Specifications

Total Unit Weight
1250 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 10.06 cu/in
Motor Type Var. Speed Bi-Directional
2600
20,579
8481
Motor Output Shaft 1 1/4" Spline 13T
2800
22,162
9133
Motor Mount SAE - D 2 Bolt
3000
23,746
9786
Motor Ports Radial (Quick Coupler)
3200
25,328
10,438
Cross-Over Pressure Relief None
3400
26,912
11,091
Planetary Gearbox Information
3600
28,495
11,743
Gearbox Type Planetary Three Stage
3800
30,078
12,396
Reduction Ratio 69.7:1
4000
31,661
13,048
Output Shaft 4" Square
Reference Speed Chart
Oil Capacity 3.1 Gallons
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 60,000 lbs.
40
11
27

VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

45
13
31
50
14
34
55
15
37
60
17
41
Manufacturer's Efficiency Statement

Application
Connection
Excavator
DV-40 / Variable Speed unit
Drilling
S-130
20T-30T

Accessories

  • TruLink Class 2 4" Monitor
  • TruLink Class 2 8" Monitor
  • Link Arm 75mm
DV-40 / Variable Speed diagram

DV-40 / Variable Speed - Specifications

Total Unit Weight
1500 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 10.06 cu/in
Motor Type Var. Speed Bi-Directional
2600
24,737
10,194
Motor Output Shaft 1 1/4" Spline 13T
2800
26,640
10,979
Motor Mount SAE - D 2 Bolt
3000
28,542
11,762
Motor Ports Radial (Quick Coupler)
3200
30,445
12,547
Cross-Over Pressure Relief None
3400
32,348
13,331
Planetary Gearbox Information
3600
34,251
14,115
Gearbox Type Planetary Three Stage
3800
36,154
14,900
Reduction Ratio 83.78:1
4000
38,056
15,683
Output Shaft 130mm Square
Reference Speed Chart
Oil Capacity 3.7 Gallons
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 60,000 lbs.
40
9
23

VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

45
10
25
50
12
28
55
13
31
60
14
34
Manufacturer's Efficiency Statement

Application
Connection
Excavator
RS-7X / Single Speed unit
Anchor
H-200
N/A

Accessories

  • Bail Assembly Kit (convert to RS-7)
RS-7X / Single Speed diagram

RS-7X / Single Speed - Specifications

Total Unit Weight
120 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure (psi)
Torque (ft/lbs)
Displacement 18.7 cu/in
1000
3004
Motor Type Single Speed
1300
3906
Motor Output Shaft 1" 6B Spline
1500
4507
Motor Mount SAE - A 2 Bolt
1700
5108
Motor Ports 3/4" - 16 O-Ring
1900
5709
Cross-Over Pressure Relief Set @ 2700 psi
2100
6310
Planetary Gearbox Information
2300
6911
Gearbox Type Planetary Two Stage
2500
7512
Reduction Ratio 14.79:1
Output Shaft 2" Hex
Reference Speed Chart
Oil Capacity .87 Gallons
Flow (gpm)
Speed (rpm)
Oil Type SAE 80W90 GL-5
10
7
Shaft Pull Out (lbs.) 7,000 lbs.
15
10
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.
20
14
25
17
 
Manufacturer's Efficiency Statement

Application
Connection
Excavator

RS-7 / Single Speed unit

Anchor
H-200
5T-8T

Accessories

  • Universal Mounting Plate for Skid-Skeer
  • Long Reach Universal Mount for Skid-Skeer
  • TruLink Class 1 4" Monitor
  • TruLink Class 1 8" Monitor
  • Link Arm 45mm
  • Pin Assembly 45mm
RS-7 / Single Speed diagram

RS-7 / Single Speed - Specifications

Total Unit Weight
170 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure (psi)
Torque (ft/lbs)
Displacement 18.7 cu/in
1000
3004
Motor Type Single Speed
1300
3906
Motor Output Shaft 1" 6B Spline
1500
4507
Motor Mount SAE - A 2 Bolt
1700
5108
Motor Ports 3/4" - 16 O-Ring
1900
5709
Cross-Over Pressure Relief Set @ 2700 psi
2100
6310
Planetary Gearbox Information
2300
6911
Gearbox Type Planetary Two Stage
2500
7512
Reduction Ratio 14.79:1  
Output Shaft 2" Hex
Reference Speed Chart
Oil Capacity .87 Gallons
Flow (gpm)
Speed (rpm)
Oil Type SAE 80W90 GL-5
10
7
Shaft Pull Out (lbs.) 7,000 lbs.
15
10
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.
20
14
25
17
 
Manufacturer's Efficiency Statement

Application
Connection
Excavator

RS-12 / Single Speed unit

Anchor
H-250
11T-17T

Accessories

  • Universal Mounting Plate for Skid-Skeer
  • Long Reach Universal Mount for Skid-Skeer
  • TruLink Class 1 4" Monitor
  • TruLink Class 1 8" Monitor
  • Link Arm 45mm
  • Pin Assembly 45mm
RS-12 / Single Speed diagram

RS-12 / Single Speed - Specifications

Total Unit Weight
546 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure (psi)
Torque (ft/lbs)
Displacement 23.9 cu/in
1600
6941
Motor Type Single Speed Bi-Directional
1800
7808
Motor Output Shaft 1 1/2" Spline 17T
2000
8677
Motor Mount SAE - C 4 Bolt
2200
9544
Motor Ports 1 1/16" 12 O-Ring
2400
10,411
Cross-Over Pressure Relief Set @ 3100 psi
2600
11,280
Planetary Gearbox Information
2800
12,147
Gearbox Type Planetary Two Stage
3000
13,014
Reduction Ratio 17.39:1
Reference Speed Chart
Output Shaft 2 1/2" Hex
Flow (gpm)
Speed (rpm)
Oil Capacity 1.7 Gallons
15
7
Oil Type SAE 80W90 GL-5
20
9
Shaft Pull Out (lbs.) 22,500 lbs.
25
11
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.
30
13
35
15
40
18
Manufacturer's Efficiency Statement

Application
Connection
Excavator

RT-9 / Two Speed unit

Anchor
H-250
8T-13T

Accessories

  • Universal Mounting Plate for Skid-Skeer
  • Long Reach Universal Mount for Skid-Skeer
  • TruLink Class 1 4" Monitor
  • TruLink Class 1 8" Monitor
  • Link Arm 45mm
  • Pin Assembly 45mm
RT-9 / Two Speed diagram

RT-9 / Two Speed - Specifications

Total Unit Weight
540 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 11.9 cu/in
Motor Type Two Speed Bi-Directional
1600
5253
2626
Motor Output Shaft 1 1/4" Spline 14T
1800
5910
2954
Motor Mount SAE - C 4 Bolt
2000
6567
3283
Motor Ports 1 5/8" - 12 UN-2B
2200
7223
3611
Cross-Over Pressure Relief Set @ 3100 psi
2400
7880
3940
Planetary Gearbox Information
2600
8536
4268
Gearbox Type Planetary Two Stage
2800
9193
4596
Reduction Ratio 25.36:1
3000
9850
4925
Output Shaft 2 1/2" Hex  
Oil Capacity 1.7 Gallons
Reference Speed Chart
Oil Type SAE 80W90 GL-5
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Shaft Pull Out (lbs.) 22,500 lbs.

2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

20
13
25
30
19
38
40
25
50
50
31
63
Manufacturer's Efficiency Statement

Application
Connection
Excavator

RT-12 / Two Speed unit

Anchor
H-250
11T-17T

Accessories

  • Universal Mounting Plate for Skid-Skeer
  • Long Reach Universal Mount for Skid-Skeer
  • TruLink Class 1 4" Monitor
  • TruLink Class 1 8" Monitor
  • Link Arm 45mm
  • Pin Assembly 45mm
RT-12 / Two Speed diagram

RT-12 / Two Speed - Specifications

Total Unit Weight
655 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 14.9 cu/in
Motor Type Two Speed Bi-Directional
1600
6576
3068
Motor Output Shaft 1 1/4" Spline 14T
1800
7398
3451
Motor Mount SAE - C 4 Bolt
2000
8220
3835
Motor Ports 1 5/8" - 12 UN-2B
2200
9042
4219
Cross-Over Pressure Relief Set @ 3100 psi
2400
9864
4603
Planetary Gearbox Information
2600
10,686
4986
Gearbox Type Planetary Two Stage
2800
11,508
5369
Reduction Ratio 25.36:1
3000
12,330
5753
Output Shaft 2 1/2" Hex  
Oil Capacity 1.8 Gallons
Reference Speed Chart
Oil Type SAE 80W90 GL-5
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Shaft Pull Out (lbs.) 22,500 lbs.

2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM. NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

20
10
21
30
15
32
40
20
43
50
25
54
Manufacturer's Efficiency Statement

Application
Connection
Excavator
RT-20 / Two Speed unit
Anchor
H-300
20T-30T

Accessories

  • TruLink Class 1 4" Monitor
  • TruLink Class 1 8" Monitor
  • Link Arm 45mm
  • Pin Assembly 45mm
RT-20 / Two Speed diagram

RT-20 / Two Speed - Specifications

Total Unit Weight
855 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 11.9 cu/in
Motor Type Two Speed Bi-Directional
1600
12,086
6043
Motor Output Shaft 1 1/4" Spline 14T
1800
13,597
6798
Motor Mount SAE - C 4 Bolt
2000
15,108
7554
Motor Ports 1 5/8" - 12 UN-2B
2200
16,618
8309
Cross-Over Pressure Relief Set @ 3100 psi
2400
18,129
9064
Planetary Gearbox Information
2600
19,640
9820
Gearbox Type Planetary Three Stage
2800
21,151
10,575
Reduction Ratio 60.56:1
3000
22,662
11,331
Output Shaft 3" Hex  
Oil Capacity 2.6 Gallons
Reference Speed Chart
Oil Type SAE 80W90 GL-5
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Shaft Pull Out (lbs.) 45,000 lbs.

2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM. NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

20
5
10
30
8
15
40
10
20
50
13
25
Manufacturer's Efficiency Statement

Application
Connection
Excavator
RT-30 / Two Speed unit
Anchor
S-400
20T-30T

Accessories

  • TruLink Class 2 4" Monitor
  • TruLink Class 2 8" Monitor
  • Link Arm 75mm
  • Pin Assembly 75mm
RT-30 / Two Speed diagram

RT-30 / Two Speed - Specifications

Total Unit Weight
1220 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 13.9 cu/in
Motor Type Two Speed Bi-Directional
1600
16,250
8125
Motor Output Shaft 1 1/4" Spline 14T
1800
18,281
9140
Motor Mount SAE - C 4 Bolt
2000
20,312
10,156
Motor Ports 1 5/8" - 12 UN-2B
2200
22,344
11,171
Cross-Over Pressure Relief Set @ 3100 psi
2400
24,375
12,187
Planetary Gearbox Information
2600
26,407
13,203
Gearbox Type Planetary Three Stage
2800
28,438
14,218
Reduction Ratio 69.7:1
3000
30,470
15,234
Output Shaft 4" Square  
Oil Capacity 3.1 Gallons
Reference Speed Chart
Oil Type SAE 80W90 GL-5
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Shaft Pull Out (lbs.) 60,000 lbs.

2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM. NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

20
4
8
30
6
11
40
8
15
50
9
19
Manufacturer's Efficiency Statement

Application
Connection
Excavator
RT-40 / Two Speed unit
Anchor
S-300
20T-30T

Accessories

  • TruLink Class 2 4" Monitor
  • TruLink Class 2 8" Monitor
  • Link Arm 75mm
  • Pin Assembly 75mm
RT-40 / Two Speed diagram

RT-40 / Two Speed - Specifications

Total Unit Weight
1440 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 13.9 cu/in
Motor Type Two Speed Bi-Directional
1600
21,074
10,537
Motor Output Shaft 1 1/4" Spline 14T
1800
23,708
11,854
Motor Mount SAE - C 4 Bolt
2000
26,343
13,171
Motor Ports 1 5/8" - 12 UN-2B
2200
28,976
14,488
Cross-Over Pressure Relief Set @ 3100 psi
2400
31,611
15,806
Planetary Gearbox Information
2600
34,245
17,122
Gearbox Type Planetary Three Stage
2800
36,880
18,439
Reduction Ratio 90.39:1
3000
39,514
19,757
Output Shaft 130mm Square  
Oil Capacity 3.7 Gallons
Reference Speed Chart
Oil Type SAE 80W90 GL-5
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Shaft Pull Out (lbs.) 60,000 lbs.

2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM. NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

20
3
6
30
4
9
40
6
12
50
7
15
Manufacturer's Efficiency Statement

Application
Connection
Excavator
RV-70 / Variable Speed unit
Anchor
S-150
30T-40T

Accessories

  • TruLink Class 2 4" Monitor
  • TruLink Class 2 8" Monitor
  • TruLink Class 3 8" Monitor (3.967" pin)
  • Link Arm 75mm
  • Pin Assembly 75mm
RV-70 / Variable Speed diagram

RV-70 / Two Speed - Specifications

Total Unit Weight
2850 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 13.73 cu/in
Motor Type Var. Speed Bi-Directional
2800
55,301
27,638
Motor Output Shaft 13T 8/16 DP Spline
2900
57,276
28,625
Motor Mount SAE - D 4 Bolt
3000
59,251
29,612
Motor Ports Code 62 SAE Split Flange
3100
61,226
30,599
Cross-Over Pressure Relief Not Equipped
3200
63,201
31,586
Planetary Gearbox Information
3300
65176
32,573
Gearbox Type Planetary Three Stage
3400
67,151
33,560
Reduction Ratio 126:1
3500
69,126
34,547
Output Shaft 150mm Square
Reference Speed Chart
Oil Capacity 9.2 Gallons
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 100,000 lbs.
70
8
16

VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

90
10
21
110
12
24
130
14
29
150
17
33
Manufacturer's Efficiency Statement

Application
Connection
Excavator
RV-100 / Variable Speed unit
Anchor
S-177
60T-90T

Accessories

  • TruLink Class 3 8" Monitor
RV-100 / Variable Speed diagram

RV-100 / Variable Speed - Specifications

Total Unit Weight
3800 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 13.73 cu/in
Motor Type Var. Speed Bi-Directional
2800
88,334
44,167
Motor Output Shaft 13T 8/16 DP Spline
2900
91,489
45,744
Motor Mount SAE - D 4 Bolt
3000
94,644
47,322
Motor Ports Code 62 SAE Split Flange
3100
97,799
48,899
Cross-Over Pressure Relief Not Equipped
3200
100,954
50,477
Planetary Gearbox Information
3300
104,108
52,054
Gearbox Type Planetary Four Stage
3400
107,263
53,631
Reduction Ratio 208.54:1
3500
110,418
55,209
Output Shaft 177mm Square
Reference Speed Chart
Oil Capacity 11.0 Gallons
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 180,000 lbs.
70
5
9

VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

90
6
12
110
7
15
130
9
17
150
10
20
Manufacturer's Efficiency Statement

Application
Connection
Excavator
RV-140 / Variable Speed unit
Anchor
S-177
90T-150T

Accessories

  • TruLink Class 4 8" Monitor
RV-140 / Variable Speed diagram

RV-140 / Variable Speed - Specifications

Total Unit Weight
4000 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 13.73 cu/in
Motor Type Var. Speed Bi-Directional
2800
112,521
56,260
Motor Output Shaft 13T 8/16 DP Spline
2900
116,540
58,270
Motor Mount SAE - D 4 Bolt
3000
120,559
60,279
Motor Ports Code 62 SAE Split Flange
3100
124,577
62,288
Cross-Over Pressure Relief Not Equipped
3200
128,596
64,298
Planetary Gearbox Information
3300
132,614
66,307
Gearbox Type Planetary Four Stage
3400
136,633
68,316
Reduction Ratio 265.64:1
3500
140,652
70,326
Output Shaft 177mm Square  
Oil Capacity 11.0 Gallons
Reference Speed Chart
Oil Type SAE 80W90 GL-5
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Shaft Pull Out (lbs.) 250,000 lbs.

VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

70
4
7
90
5
9
110
6
12
130
7
14
150
8
16
Manufacturer's Efficiency Statement

Application
Connection
Excavator
RV-200 / Variable Speed unit
Anchor
S-200
90T-150T

Accessories

  • TruLink Class 4 8" Monitor
RV-200 / Variable Speed diagram

RV-200 / Variable Speed - Specifications

Total Unit Weight
5000 lbs.
 
Reference Torque Chart
Hydraulic Motor Information
Pressure
(psi)
High Torque
(ft/lbs)
Low Torque
(ft/lbs)
Displacement 13.73 cu/in
Motor Type Var. Speed Bi-Directional
2800
169,434
84,717
Motor Output Shaft 13T 8/16 DP Spline
2900
175,486
87,743
Motor Mount SAE - D 4 Bolt
3000
181,537
90,768
Motor Ports Code 62 SAE Split Flange
3100
187,588
93,794
Cross-Over Pressure Relief Not Equipped
3200
193,639
96,819
Planetary Gearbox Information
3300
199,691
99,845
Gearbox Type Planetary Four Stage
3400
205,742
102,871
Reduction Ratio 400:1
3500
211,793
105,896
Output Shaft 200mm Square
Reference Speed Chart
Oil Capacity 16.25 Gallons
Flow
(gpm)
Low Speed
(rpm)
High Speed
(rpm)
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 300,000 lbs.
70
2
5

VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling.

90
3
6
110
4
8
130
5
9
150
5
10
Manufacturer's Efficiency Statement

Accessories - Link Arm, Link Pin, and Flange Adapter

Accessories - Link Arms and Pins

  • Link Arm 45mm (shown)
  • Link Arm 75mm
  • Pin Arm Assembly 45mm (shown)
  • Pin 75mm
Link Arm, Link Pin, and Flange Adapter

Accessories - Flange Adapters

  • H-250 Hex Flange Adapter
  • H-300 Hex Flange Adapter
  • S-400 Hex Flange Adapter

Accessories - Drive Tools
 
Accessories - Drive Tools
Drive
Shaft
Drive
Shaft
DS-2
2" Hex
RT-12
2 1/2" Hex
DS-3
2" Hex
RT-20
3" Hex
DT-5
2 1/2" Hex
RT-30
4" Square
DT-15
3" Hex
RT-40
130mm Square
RS-7X
2" Hex
RV-70
150mm Square
RS-7
2" Hex
RV-100
177mm Square
RS-12
2 1/2" Hex
RV-140
177mm Square
RT-9
2 1/2" Hex
RV-200
200mm Square

RS-7X Bail Assembly for RS-7
 
Swivel Brackets

Features

  • Converts RS-7X Planetary Drive to RS-7 Planetary Drive.
  • With bail kit and mount the RS-7X drive can be used with skid steer, also will work with mini excavator and mini digger derricks.

Accessories - RS-7X Bail Assembly

  • Bail Assembly Kit for RS-7

Features

  • For use with MS-100 and MS-125 Planetary Drives.
  • Convert single-swivel units into double-swivel units.

Accessories - Swivel Bracket

  • Double Swivel Bracket

TruLink™ Pin

TruLink™ Pin - Torque is measured at two points within the connection pin located between the anchor drive attachment and the prime mover.

The TruLink™ pin simply replaces the OEM pin, ensuring that no additional weight or height is added to the installation equipment.

TruLink Pin

TruLink Pin in use
TruLink Pin in use

Replaces Connection Pin - No added weight, height, or loss of stroke.

Built-in Inclinometer allows operator to maintain a constant angle of insertion.

All data is recorded within the display - No laptop required to extract data.

Downward (perpendicular) force is omitted with patent pending technology - Isolating Torque Values.

Strain Gage Technology - Not "inferred" or calculated as with hydraulic systems.

Hard Wired Connection - Eliminates interference and signal issues encountered with wireless systems.

Ability to chart and record depth for each pile.

TruLink logoTruLink Torque Monitor™
A revolutionary new approach to collecting installation
data associated with helical pier projects.

The TruLink™ Torque Monitor system offers true torque readings that deliver a high degree of accuracy (+/1 2%) while providing the operator with real time data. TruLink™ records actual torque being applied to the helical pile, the installation angle, and the depth. Unlike other torque monitoring systems available, TruLink isolates torque values only. Downward and side load forces are omitted, ensuring the data is clean.


TruLink Torque Monitor

4" or 8" easy-to-read touch screen display.

Displays time/date, torque, depth, and pile number.

Easily mounts inside operator's cab.

ip67 Display Housing - Rugged, weatherproof, and shock-resistant.

Simple Power Supply - Adapter uses auxiliary power port, cigarette lighter.

Description
Screen Size
Pin Diameter
Max. Torque
(ft/lb)
TL4-C1
4"
45mm
22,500
TL4-C2
4"
75mm
69,126
TL8-C1
8"
45mm
22,500
TL8-C2
8"
75mm
69,126
TL8-C3
8"
3.967"
110,418
TL8-C4
8"
4.5"
211,790


Drive Mounts - Universal Skid Loader Mount

Skid Loader Mount Attachment Plate - Attachment Plate connects to the mounting plate on the front of the Skid Loader. The Link Arm connects to both the Attachment Plate and the Drive Unit with the supplied connection pins.

Long Reach Universal Skid Mount

Long Reach Universal Skid Mount with DS-2 DriveMount shown with DS-2 Drive

Universal Skid Mount - Standard

Universal Skid Mount (Standard) with DS-2 DriveMount shown with DS-2 Drive



Drive Mounts / Backhoe Loader/Excavator Mount

End of Boom Mount

Excavator/Backhoe End of Boom Mount

Mounting Bracket connects directly to the boom with the customer-supplied connection pin. The Drive Unit connects to the Mounting Bracket with the supplied connection pin.

End of Boom Mount

Quick Coupler Mount

Excavator/Backhoe Quick Coupler Mount

Mounting Bracket connects to the quick coupler when the jaws of the quick coupler engage the pins on the Mounting Bracket. The Link Arm connects to both the Mounting Bracket and the Drive Unit with the supplied connection pins.

Quick Coupler Mount

Drive Mounts - Examples

Skid Loader Mounting System

  • Provides maximum ground clearance of 7' to 11' depending on model selected.
  • Increases height capability so drillers can use longer auger bits and anchor installers can use longer sections.
  • Unique design optimizes the operator's visibility by positioning the Drive up to 48" from the front of the skid loader.
  • Standard retractable stabilizer arms allow the Drive attachment to stand upright when not in use. Improves ability to store, transport, and attach to the skid loader.
  • Designed to be used with up to a 12,000 ft/lb Drive.
Long reach skid mount used to install helical anchors.Long reach skid mount used to install helical anchors.

Excavator quick coupler mount used with DT-15 drive and auger.Excavator quick coupler mount used with
DT-15 drive and auger.

Excavator Mounting System

  • Complete mounting system for all sizes of excavators.
  • Mounts can mount directly to the boom or be designed to work with an existing quick coupler.
  • Excavator mounts allow for maximum movement to ensure the Drive always hangs true to the ground.
  • Custom mounts can be designed for specific applications.
  • Mounts are available for the entire range of Drives offered by the manufacturer.

Revolution Series logo


Excavation Augers / Quick Change System

Flight Bodies / 5' 10', or 20' lengths

16", 18", 20", 24", 30", 36", 42", 48" diameter (same sizes available in all Options below)

Quick Change Flight Body
No need to carry two augers, use one Quick Change flight body
with multiple interchangeable heads.


Option 1
Carbide and Dirt Heads
Option 2
Spiral Rock Heads
Option 3
Rock Ripper®
Heads
Carbide and Dirt Heads
Spiral Rock Heads
Rock Ripper Heads


Parts - Available Teeth and Holders

  • 2070 Dirt Fas-N-Lok™
  • 1076 Carbide
  • 2077 Carbide Fas-N-Lok™
  • 2078 Carbide Gage
  • 2079 Carbide Fas-N-Lok™
  • 604-C Carbide-Faced Tooth
  • SR100 Strata Conical Tooth
  • P30 Bullet Tooth Holder
  • 1604 Holder

Parts - Available Pilot Bits and Holders

  • TF-1000 Triflow Pilot Bit
  • P-6000 Carbide Pilot Bit
  • C31HD Pilot Bit Assembly

Pilot Bit Assemblies include pilot, nuts, bolts,
and teeth if applicable.

Strata logo

Take Your Drilling to New Depths with STRATA Drilling Grade Carbide Teeth!

The improved grade of carbide in all STRATA teeth increases the life cycle of the tooth, meaning less down time and increased productivity!


AWDS logo