AC Distributor GooglePlus
Flags
Flags
Facebook

Secoroc Rock Drilling Tools - Grinding Equipment

grinding equipmentSecoroc Grinding equipment -- for drillers who prefer to
spend less money on drilling

You've probably known for a long time that regular grinding is essential for productivity. But what you may not know is just how important it is. We decided to crunch some numbers and find out.

By wearing down your button bits by a third you'll slow down your penetration rate by 30%. But more importantly you'll increase your running costs by at least 40%! And why? Because the hole will take longer to drill and your labor and rig running costs will escalate. And at the end of the day you'll have drilled fewer holes.

Staying sharp makes a lot of business sense. Maintaining penetration can save you money. Firstly you need good grinding equipment for a start -- and you won't find any better than ours. And secondly, you need to spend time and energy grinding your bits. But the rewards are significant. For an investment amounting to just 2% of your overall drilling costs you can restore your worn bits to their former glory. And with these bits you cut the time and manpower needed to drill the hole. In fact, you can reduce overall drilling costs up to 30%. How? By using the market's widest selection of efficient, ergonomically designed grinding machines for fixed installations and field operations - Secoroc Grind Matic.

Secoroc hammer being held
button bits
Secoroc hammer being held
grinding button bits on hammer

Get the sharpest advice. There are many different types of bits, some with inserts and others with buttons -- and they come in many different sizes. To further complicate matters, no two rocks are the same. Consequently, bit wear differs. There's only one good piece of advice we can give you: don't make a decision before talking to us. And remember, thanks to our extensive service network, a good regrind is only a phone call away.

The right tools to get you back on the cutting edge...

grinding equipment in useEvery regrinding operation requires its own special tool. The wrong one can easily damage your bits. With Secoroc Grind Matic grinding equipment --complemented by a global service organization -- you needn't worry. Your bits will soon be as good as new.

Grinding solutions for every job site. We provide mobile and fixed grinders for tapered, threaded, DTH and COPROD button bits, as well as for cross-type bits and integrals with chisel inserts. Whatever the button profile, we have the solution to match. Naturally, we also offer a full range of accessories, including grinding wheels, grinding cups, and bit holders. Check out our selection. We probably already have the ideal machine for your site.

diamond grinding wheelsDiamonds are a driller's best friend. If you need to grind steel and cemented carbide in a single operation, you won't find better tools than our patented diamond grinding wheels for spherical and ballistic cemented carbide buttons. Thanks to the diamond-coated steel body, these grinding wheels retain their profile throughout their working life. So when used in our semi-automatic grinding machines (Grind Matic Jazz, BQ2 and BQ2-DTH), or their manual counterparts (Manual B/Manual B-DTH), these wheels always deliver perfect results. There's no other way to grind spherical and ballistic buttons properly.

A Machine for Every Occasion

Grinding Machine
Button Bits
DTH/COPROD bits
Reaming bits
Cross-type bits
Integrals
Grind Matic BQ2
X
 
X
   
Grind Matic Jazz
X
X
X
   
Grind Matic Manual B
X
 
X
   
Grind Matic HG
X
X
X
   
Grind Matic BQ2-DTH
O
X
     
Grind Matic Manual B-DTH*
O
X
     
Grind Matic X      
X
 
Grind Matic Swing        
X
Grind Matic Senior        
X
X = Recommended O = Can be used *can be used for ODEX pilot bits & reaming bits

Use the Best Grinding Tool

 
New
Grinding Tool
Half Worn
Grinding Tool
Worn
Grinding Tool
 
grinding template
A useful tip: Use a Secoroc grinding Template, and you'll see when it's time for a regrind.
Patented
Diamond
Grinding
Wheel
grinding wheel
grinding wheel
grinding wheel
grinding wheels
Traditional Grinding
Cup
grinding cup
grinding cup
grinding cup
grinding cups
protrusion lossProtrusion Loss

Grinding cups for button bits, COPROD, and down the hole bits. Grinding cups are used for smaller grinding volumes to grind both button and down the hole bits in air-powered hand-held grinding machines. Featuring a special mixture of abrasive, Secoroc grinding cups are able to grind cemented carbide and steel in a single operation. You can use either air or water as a coolant.

It's safe to say that hand-held grinding has never been cheaper, easier, or quicker.

Silicon carbide grinding wheels for cross-type bits and integrals. When grinding insert bits, it's vital that the thickness of the grinding wheel is in proportion to the diameter of the bit -- to prevent damage to the inserts. What's more, to avoid overheating the cemented carbide inserts, be sure to select a grinding wheel that's too soft rather than too hard.

Available Templates

grinding template for button bits
Grinding Template
for Button Bits

grinding template for cross-type bits
Grinding Template
for Cross-Type Bits
grinding template for integral rods
Grinding Template
for Integral Rods



Secoroc Grind Matic BQ2

Semi-Automatic Grinding Machine for Button BitsSecoroc Grind Matic BQ2Secoroc Grind Matic BQ2

Electrical Specifications
220 V 3-phase 60 Hz
-
440 V 3-phase 60 Hz
-
Accessories Included in Delivery
Allen key, 8 mm
1 piece
Centering cup, 11 mm
1 piece
Centering device
1 piece
Coolant concentrate
0.53 quarts
Grinding wheel, uncoated for centering
-
Protective goggles
-
Operator's instructions and spare parts list
-
Box wrench, 15 mm
-
Grinding Capacity
Maximum height of drill bit
7 7/8"
Maximum diameter of drill bit
5"
Minimum distance between buttons
9/64"
Technical Data
Air pressure, maximum
101.5 psi
Air pressure, minimum
87 psi
Air consumption
1.4 cfm
Capacity of cooling-fluid tank
5.8 gallons
Output, spindle motor
1.00 kW
Output, driving plate motor
0.15 kW
Output, coolant pump motor
0.10 kW
Speed, spindle
14,900 rpm
Speed table (60 Hz)
55 rpm
Voltage working light
12 V
Weight excluding packaging
490 lbs.
Transport dimension
46" x 41" x 69"

NOTE: Grind Matic BQ2 must be completed with grinding wheels, centering cups, bit holders (indicate button size and thread dimension), and indexing templates.

control boxGrind Matic BQ2 is a fast, semi-automatic grinder specially designed for our profiled diamond grinding wheels, allowing you to precision-grind cemented carbide buttons and steel in the same operation. BQ2 is so easy to use that one operator can readily handle more than one machine at a time.

The machine also offers a number of novel features. To begin with, a time relay has replaced the pulse counter. And our new grinding spindle allows you to change grinding wheels without fuss or tools.

We've also introduced an electric locking device to ensure the same stroke length regardless of bit height. To use BQ2 simply connect the machine to electricity and air.


Secoroc Grind Matic BQ2-DTH

Semi-Automatic Grinding Machine
for DTH and COPROD bits

Secoroc Grind Matic BQ2-DTH

Secoroc Grind Matic BQ2-DTH

Electrical Specifications
220 V 3-phase 60 Hz
-
440 V 3-phase 60 Hz
-
Accessories Included in Delivery
Coolant concentrate
0.53 quarts
Protective goggles
-
Operator's instructions and spare parts list
-
Box wrench, 15 mm
1 piece
Allen key, 8 mm
1 piece
Optional Accessories
Auxiliary set for grinding threaded bits
(excl. bit holder and templates)
-
Grinding Capacity
Maximum height of drill bit
25 5/8"
Maximum diameter of drill bit
7"
Minimum distance between buttons
9/64"
Technical Data
Air pressure, maximum
101.5 psi
Air pressure, minimum
87 psi
Air consumption
1.4 cfm
Capacity of cooling-fluid tank
5.8 gallons
Output, spindle motor
3.00 kW
Output, table drive motor
0.15 kW
Output, coolant pump motor
0.10 kW
Speed, spindle
14,900 rpm
Speed table (60 Hz)
26 rpm
Voltage working light
12 V
Weight excluding packaging
760 lbs.
Transport dimension
48" x 48" x 67"

NOTE: Grind Matic BQ2-DTH must be completed with grinding wheels, centering cups, and bit holders (indicate button size, but diameter, and type of hammer).

Grind Matic BQ2-DTH is a fast machine. And with speed comes greater efficiency. We've included an indexing bit holder and an automatic centering arm. Combine these novel features with a more powerful grinding motor, as well as a fourfold increase in bit rotation speed, and you're looking at vastly superior grinding capacity.

Grind Matic BQ2-DTH is designed with the driller in mind. Add to that a handy time relay for setting grinding time, a tiltable bit holder to help you handle heavier bits more easily, plus an electric locking device and you'll find this is a highly rational grinding machine.

Moreover, Grind Matic BQ2-DTH is built to last. The spindle bearing is protected by a splash guard. And all electrical and pneumatic components are housed in a cabinet on the side of the machine, protecting them from dust, dirt, and water.


Secoroc Grind Matic Jazz

Grind Matic Jazz, standard
Main bit holder for threaded bits included in delivery.
Grind Matic Jazz, DTH
Main bit holder for DTH/COPROD bits included in delivery.

Rig-Mounted, Semi-Automatic Grinding Machine for Tapered, Threaded,
DTH, and COPROD Bits

Secoroc Grind Matic Jazz

Secoroc Grind Matic Jazz

Accessories Included in Delivery
Box wrench, 11 mm
1 piece
Box wrench, 16 mm
1 piece
Protective goggles
-
Operators instructions and spare parts list
-
Optional Accessories
Anti-Freeze kit
-
Main bit holder for DTH/COPROD bits
-
Main bit holder for threaded bits
-
Mounting bracket for Atlas Copco drill rig
- with cabin / without cabin
-
3-leg stand
-
Centering tool
-
Grinding Capacity
Maximum distance between bit holder and grinding wheel
9 7/8"
Maximum diameter of drill bit
10"
Minimum diameter of drill bit
1 3/8"
Minimum distance between buttons
9/64"
Technical Data
Air pressure, maximum
101.5 psi
Air pressure, minimum
87 psi
Air consumption
53 cfm
Coolant container
0.79 gallons
Output, spindle motor
1.00 kW
Speed, spindle
15,000 rpm
Voltage
24 V
Weight excluding packaging
198 lbs.
Transport dimension
32" x 20" x 28"

NOTE: Grind Matic Jazz must be completed with grinding wheels, centering cups, and bit holders, and indexing templates.

  • Grinding Wheels - Diamond grinding wheels for button bits (click here for specs)
  • Indexing Templates - Indexing templates for Jazz
  • Grinding Template - Grinding template for button bits is available

Mobile perfection. The latest addition to the Secoroc range of grinding equipment, Grind Matic Jazz is the only rig-mounted, semi-automatic grinder that delivers perfection. Featuring patented profiled diamond grinding wheels, it restores worn spherical and ballistic buttons to their former glory.

Grinding on the move. Grind Matic Jazz is easily retrofitted to most rigs. Mounted in front of the cab, the grinder is unobtrusive when not in use, but swings out for easy access when it's time to sharpen your bits. Thanks to low air consumption you can drill and grind simultaneously -- with full effect. Mounting is easy. Simply bolt your Jazz onto the rig, hook up the air hose, connect the power, check the mist cooling water tank and you're ready to grind.

Grinds all shapes and sizes. Equipped with a timer, Grind Matic Jazz is readily centered on each button and activated by the operator. This operation is repeated button by button. Jazz handles bit sizes from 1 3/8" up to 10" DTH bits.


Secoroc Grind Matic Manual B

Hand-Held Portable Grinding Machine for Button Bits

Secoroc Grind Matic Manual B

Secoroc Grind Matic Manual B

Accessories Included in Delivery
Allen key, 4 mm
1 piece
Centering fingers
4 pieces
Hand-held grinder, 30,000 rpm
-
Open end spanner, 14 mm
2 pieces
Protective goggles
-
Operator's instructions and spare parts list
-
Optional Accessories
Set of 5 centering fingers
-
Grinding Capacity
Maximum diameter of bit skirt
3 9/16"
Threaded bits, maximum diameter
5"
Retrac, maximum diameter
5"*
Tube drilling, maximum diameter
6"*
*Large clamping device necessary
Technical Data
Air pressure, maximum
101.5 psi
Air consumption
32 cfm
Coolant container
2.64 gallons
Idling speed of hand-held grinder
30,000 rpm
Speed of bit rotation
0-45 rpm
Weight excluding packaging
121.3 lbs.
Weight including packaging
198.4 lbs.
Transport dimension
48" x 32" x 34"

using the Secoroc Grind Matic Manual BNOTE: Grind Matic Manual B must be completed with grinding wheels and bit holders.

Grind Matic Manual B is an air-powered grinding machine equipped with diamond grinding wheels for spherical and ballistic buttons. Mounted in a box fitted with wheels and handles, Manual B is mobile and easy to set up. A separate water tank provides efficient cooling.

Grinding couldn't be easier. By simply folding the box support legs and connecting the air hose and the hose to the water cooler container you'll have the machine up and running in no time.

The hand-held part of Manual B is a straight air-powered grinder specially designed for Grind Matic diamond grinding wheels. The bit holder, driven by an air-powered angle-gear, is fitted in the bottom of the box. A steel spring is mounted in the profile of the grinding wheel where it functions as a centering device, facilitating easy grinding.


Secoroc Grind Matic Manual B-DTH

Hand-Held Portable Grinding Machine for DTH and COPROD bits

Secoroc Grind Matic Manual B-DTH

Secoroc Grind Matic Manual B-DTH

Accessories Included in Delivery
Allen key, 5 mm
1 piece
Allen key, 6 mm
1 piece
Centering fingers
4 pieces
Grinding belt
4 pieces
Hand-held grinder (spherical, 30,000 rpm)
-
Open end spanner, 14 mm
2 pieces
Protective goggles
-
Operators instructions and spare parts list
-
Optional Accessories
Gauge grinding unit complete
-
Centering fingers, 30,000 rpm
set of 5 pieces
Clamping device for threaded bits
-
Hand-held grinder (ballistic, 30,000 rpm)
-
Grinding Capacity
Maximum height of drill bit
19 7/8"
Maximum diameter of drill bit
8"
Maximum diameter of bit shank
6 3/4"
Technical Data
Air pressure, maximum
101.5 psi
Air consumption (including gauge grinding)
53 cfm
Air consumption (excluding gauge grinding)
49 cfm
Coolant container
2.64 gallons
Dimension of grinding belt
2" x 59"
Idling speed of hand-held grinder
18,000 rpm
Weight excluding packaging
253 lbs.
Weight including packaging
326 lbs.
Weight of gauge grinding unit, net
60.6 lbs.
Weight of gauge grinding unit, gross
77.2 lbs.
Transport dimension
48" x 32" x 37"

NOTE: Grind Matic Manual B-DTH must be completed with grinding wheels and bit holders.

Grind Matic Manual B-DTH is a hand-held grinder for grinding down the hole bits. Equipped with a few simple accessories it also grinds threaded button bits. The machine is air-powered and uses Grind Matic diamond grinding wheels for grinding spherical and ballistic buttons. The Manual B-DTH is mounted in a box fitted with wheels and handles. A separate water tank provides efficient cooling.

Smooth and swift operation. Simply connect your Manual B-DTH to air and water, and it's ready to use. The bit holder, driven by an air-powered angle gear, is mounted in the bottom of the box. The hand-held part of Manual B-DTH is a straight, air-powered grinder specially adapted to our diamond grinding wheels. A steel spring is mounted in the profile of the grinding wheel where it functions as a centering device, greatly simplifying the grinding operation. As an optional accessory Grind Matic Manual B-DTH can be fitted with a belt grinder for gauge grinding.


Secoroc Grind Matic HG

Secoroc Grind Matic HG

close up of the QuickSnap chuckHand-Held Grinding Machine for Button Bits

Grind Matic HG is a complete manual grinding system comprising a grinding machine, grinding cup, and a specially designed chuck. The grinding cups are equipped with a rubber bushing, preventing the transmission of vibrations to the machine. The cups can be cooled with either air or water.

QuickSnap, our cleverly designed chuck, allows you to change grinding cups quickly and easily. Add to that silent and almost vibrationless operations, and the Grind Matic HG is one of the most operator-friendly hand-held grinders on the market.

Accessories Included in Delivery
 
Optional Accessories
Adjustable angle connector
-
Lubricator
Allen key, 2 mm
1 piece
Reconditioning tool for grinding cups
Allen key, 3 mm
1 piece
 
Allen key, 5 mm
1 piece
Grinding Capacity
Claw coupling, 1/4"
-
Button size
9/32" - 25/32"
Grease gun
-
 
Hose (PVC 03)
-
Technical Data
Hose (PVC 6), 40"
40"
Air pressure, maximum
101.5 psi
Hose clamp
.28"-.34"
Air consumption, unloaded
106 cfm
Hose clamp
.43"-.51"
Air consumption, loaded (at 86 psi)
89 cfm
Hose clamp
1.02"x1.50"
Hose dimension, air
1/2"
Nipple
-
Hose dimension, water
1/4"
Pipe
12"
Idling speed
17,000 rpm
Seal kit
-
Water flushing pressure, maximum
65.3 psi
Seat
-
Weight excluding hoses
6.2 lbs.
Support ring
-
Grinding Cups - Diamond grinding cups for Grind Matic HG (click here for specs)
Operator's instructions and spare parts list
  • Grinding Cups - Diamond grinding cups for Grind Matic HG (click here for specs)
  • Grinding Template - Grinding template for button bits is available

Secoroc Grind Matic X

Grinding Machine
for Cross-Type Bits

Secoroc Grind Matic X

Secoroc Grind Matic X

Electrical Specifications
220 V 3-phase 60 Hz
-
440 V 3-phase 60 Hz
-
Accessories Included in Delivery
Flange washer
-
Mandrel, complete
-
Protective goggles
-
Wheel dresser
-
Operator's instructions and spare parts list
-
Grinding Capacity
Maximum diameter of cross-type bit
2 17/32"
Technical Data
Output
1.70 kW
Idling speed, 60 Hz
1680 rpm
Output, grinding device
0.37 kW
Automatic grinding action, 60 Hz
140 strokes/min.
Grinding wheel, frontal grinding:
- Maximum diameter
11 13/16"
- Maximum width
2 11/16"
Grinding wheel, gauge grinding:
- Diameter
11 13/16"
- Width
1 1/4"
Weight excluding packaging
518 lbs.
Weight including packaging
794 lbs.
  • Grinding Wheels - Ceramic grinding wheels for cross-type bits (click here for specs)
  • Bit Holder and Mandrel - Bit holders/Mandrels for cross-type bits (click here for specs)
  • Flange Washers - Selection of flange washers for cross-type bits (click here for specs)
  • Grinding Template - Grinding template for cross-type bits is available
tiltable bit holderGrind Matic X is ideal for fast, precision grinding of cross-type bits. The bit is locked firmly into the expander on the bit holder. All you have to do is move the bit toward the grinding wheel -- the machine takes care of the rest.

Grind Matic X comes as a fully self-contained unit in right-hand mount configuration.

Bit holders are available for different thread sizes.

Bit holder complete. If you frequently change bit size, we recommend our bit holders, including mandrel, mandrel holder, pull rod, rubber sleeves, thrust plate, and locking handle.

Optional grinding mandrel. Grind Matic X comes with one optional grinding mandrel for one thread size and corresponding flange washer for the width of the grinding wheel. Additional grinding mandrels and flange washers are charged as extra accessories. Specify the thread and diameter of the bits to be reground. If you regularly change bit size, we recommend our complete range of bit holders.

Secoroc Grind Matic XR/XX - Available on request.


Secoroc Grind Matic Swing

Grinding Machine
for Integrals

Secoroc Grind Matic Swing

Secoroc Grind Matic Swing

Accessories Included in Delivery
Grinding wheel - Grind Master Soft
-
Pin wrench
-
Protective goggles
-
Operator's instructions and spare parts list
-
Optional Accessories
Grinding wheel - Grind Master Hard
-
Grinding wheel - Grind Master Soft
-
Chuck bushing, wear gauge
- H19 (0.75"), H22 (0.85"), H25 (1")
-
Technical Data
Air pressure, maximum
101.5 psi
Air consumption
53 cfm
Cutting-edge angle
110°
Cutting-edge radius
3 5/32"
Gauge grinding arrangement included
-
Hose connections, air / water
1/2" / 1/4"
Idling speed
4080 rpm
Power output
1.10 kW
Size of grinding wheel
- D x T x H
5' x 2 1/2" x 1 1/4"
- DI x TI
3 1/4" x 2"
Spindle diameter
5/8"
Weight incl. grinding wheel and 5' water hose
61 lbs.

Secoroc Grind Matic Swing - different viewsGrind Matic Swing for integral drill rods is quickly mounted by bolting it on to the rig or on to a workbench. It can also be placed on the side of the rig using old, worn out integral drill rods. Dry grinding is carried out with a soft grinding wheel, while wet grinding uses a hard grinding wheel. But remember, under no circumstances should you use a grinding wheel intended for wet grinding when the operation you're performing is dry grinding. Grind Matic Swing has a fixed setting for grinding, giving a cutting-edge angle of 110° and a cutting edge radius of 3 1/4".

Frontal grinding. In frontal grinding, the integral drill must be locked in the pneumatic clamping device and the grinding machine swung to-and-fro while feeding is carried out using the feed screw.

Gauge grinding. In gauge grinding, the grinding device is locked and the integral drill rod rotated by hand against the grinding wheel.


Secoroc Grind Matic Senior

Grinding Machine
for Integrals

Secoroc Grind Matic Senior

Secoroc Grind Matic Senior

Secoroc Grind Matic Senior closeup

Electrical Specifications
220 V 3-phase 60 Hz
-
440 V 3-phase 60 Hz
-
Accessories Included in Delivery
Grease gun
-
Grinding wheel - Grind Master Hard
-
Protective goggles
-
Socket wrench
-
Wrench
-
Operator's instructions and spare parts list
-
Optional Accessories
Grinding wheels
- Grind Master Hard, Grind Master Soft
-
Spacer plate for H19 integral
-
Chuck bushing wear guard
- H19 (0.75"), H22 (0.85"), H25 (1")
-
Technical Data
Air pressure, maximum
101.5 psi
Cutting-edge angle, adjustable
90-130°
Grinding wheel
- D x T x H
8" x 5" x 1 1/4"
- DI x TI
6" x 3 1/4"
Cutting-edge radius, adjustable
3 1/4" x 5 1/8"
Idling speed, electric 60 Hz
1690 rpm
Output 3-phase
1.50 kW
Rod hex. maximum
1"
Weight excluding packaging
232 lbs.
Weight including packaging
265 lbs.
Transport dimension
32" x 24" x 26"
  • Grinding Wheels - Ceramic grinding wheels for chisel bits (click here for specs)
  • Grinding Template - Grinding template for integral rods is available

Grind Matic Senior is a sturdy and dependable stationary integral grinding machine with a pneumatic clamp designed for grinding larger volumes. Senior features an easily adjustable cutting edge radius and angle. The resetable feed wheel ensures that each flank is precision-ground.

Grind Matic Senior grinding wheels are available for both wet grinding (hard grinding wheel) and dry grinding (soft grinding wheel).

Gauge grinding is performed with the swinging arm in a locked position and the integral drill rod rotated by hand against the grinding wheel.


SPECIFICATION PAGES

Centering Cups for Grind Matic BQ2/BQ2-DTH/Jazz
Button Sizes - 7.0, 8.0, 9.0, 10.0, 11.0, 12.0, 12.7, 13.0, 14.0, 14.5, 15.0, 16.0, 18.0, 19.0 - mm
click here to go back BQ2BQ2-DTH / Jazz


Diamond Grinding Cups for Grind Matic HG
For
Spherical Buttons
For
Ballistic Buttons
For Steel Removal
Around Buttons
diamond grinding cups for spherical buttons
diamond grinding cup for ballistic buttons
diamond grinding cup for steel removal around buttons
7.0, 8.8, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0, 18.0, 19.0, 20.0 - mm 7.0, 8.0, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0, 16.0 - mm 7-8, 9-10, 11-12, 13-14, 15-16, 17-18, 19-20 - mm
click here to go back to Model HG


Grinding Wheels for Steel Grinding Boron Nitride - Button Bits
Grind Matic BQ2
  • 10-14 mm
  • Spacer for 10 mm button
  • Spacer for 11 mm button
  • Spacer for 12 mm button
  • Spacer for 13 mm button
  • Spacer for 14 mm button
grinding wheel for steel grinding boron nitride button bits
click here to go back BQ2


Diamond Grinding Wheels for Button Bits

Grind Matic BQ2
Grind Matic BQ2-DTH
Grind Matic Jazz
Grind Matic Manual B
Grind Matic Manual B-DTH

diamond grinding wheel for button bits

Standard Diamond-Grain Wheels

  • Spherical - 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 19 - mm
  • Ballistic - 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 19 - mm
  • Full Ballistic - 9 mm

Large Diamond-Grain Wheels

  • Spherical - 7, 8, 9, 10, 11, 12, 13 - mm
  • Ballistic - 7, 8, 9, 10, 11, 12 - mm

Grind Matic Manual B-DTH (with the 18,000 rpm grinder)

  • Spherical - 12, 13, 14, 15, 16, 18, 19 - mm
click here to go back BQ2 / BQ2-DTH / Jazz / Manual B / Manual B-DTH


Bit Holders for Button Bits
Grind Matic BQ2
  • Threaded Bits - Holder R25, R28, SR28, R32, SR32, SR35, R38/T38, SR38, SR38 retrac/guide, T45, TC45, T51 and retrac, T60
  • Tube Bits - Holder ST58, ST68
  • Tapered Bits - Holder 7° taper, 12° taper
  • Reaming Bits - Holder 64, 76, and 89 mm reamer; 89, 102, and 127 mm reamer
  • Guide Bits - Holder SR35 guide bit, R32 guide bit

NOTE: By using an auxiliary set Grind Matic BQ2-DTH can also use the above bit holders for threaded bits.

 

Grind Matic Manual B
  • Threaded Bits - R25, R28, SR28, R32, SR32, R35, SR35, R38/T38, SR38, T45, T51
  • Tapered Bits - with 7° taper, with 12° taper
  • Tube Bits - ST58, ST68
  • Reaming Bits - 64, 76, 89 mm*;
    89, 102, 127 mm*

*Separate part numbers for centering pin for bit holders.

NOTE: Clamping device for regrinding retrac bits 64-127 mm and TDS bits 89-152 mm (ST58, ST68) without bit holder.

Grind Matic BQ2-DTH/Manual B-DTH/Jazz-DTH
  • Down the Hole Bits and COPROD Bits - COP32, COP34, DHD3.5, DHD340, DHD350, DHD360, DHD380, TD40, RC50, QL40, QL50, QL60, QL80; COPROD76, COPROD89, COPROD102, COPROD127
  • Grind Matic Manual B-DTH only - Threaded bits** T38, T45, T51, ST58, ST68
clamping device for threaded bits
**Clamping device for threaded bits
click here to go back BQ2 / BQ2-DTH / Manual B / Manual B-DTH


Ceramic Grinding Wheels for Cross-Type Bits
cross-type bit dimensions
Bit Dimension
Dimension (D x T x H), mm
29 mm
300 x 19 x 32
35 mm
300 x 23 x 32
38-41 mm
300 x 26 x 32
43 mm
300 x 28 x 32
45 mm
300 x 29 x 32
48-51 mm
300 x 32 x 32
57 mm
300 x 38 x 32
76 mm
300 x 52 x 32
cross-type bit dimensions
Gauge Grinding Wheels
Dimension (D x T x H), mm
-
200 x 13 x 32
-
200 x 25 x 32
   
-
300 x 32 x 32
click here to go back Model X


Bit Holders/Mandrels for Cross-Type Bits
bit holder for cross-type bits and bit holder for tapered bits
 
mandrel for cross-type bits and mandrel for tapered bits
Bit Holder
Cross-Type Bits
Bit Holder
Tapered Bits
Mandrel
Cross-Type Bits
Mandrel
Tapered Bits
R22, R25, R28, R32, T38, T45, T51 22 mm rod 7°-11°-12°,
25 mm rod 7°-11°-12°,
28 mm rod 12°
R22, R25, R28, R32, R38/T38, T45, T51 22 mm rod 7°-11°-12°,
25 mm rod 11°-12°
click here to go back Model X


Selection of Flange Washers for Cross-Type Bits

For each size, you need an inner flange washer to align the grinding wheel correctly. The size of the flange washer corresponds to the thickness of the grinding wheel, which in turn corresponds to the diameter of the bit.

Example: Grinding a 45 mm cross-type bit requires a grinding wheel with a width of 29 mm. To align the wheel correctly you need an inner flange washer.

Bit Diameter
Grinding Wheel Width
19
21
23
26
29
32
35
38
40
50
29 mm
X
                 
31 mm  
X
               
35 mm    
X
             
38-41 mm      
X
           
43-45 mm        
X
         
48-51 mm          
X
       
57 mm              
X
   
76 mm                  
X


Flange Washers - Inner flange washers for centering of grinding wheels
Sizes: 23, 26, 28, 29, 32, 38, 52, 68 - mm
click here to go back Model X


Ceramic Grinding Wheels for Chisel Bits
 
Dimension, mm
Grinding Machine
D x T x H (mm)
DI x TI (mm)
Grind Matic Swing
125 x 63 x 32
80 x 50, hard
Grind Matic Swing
125 x 63 x 32
80 x 50, soft
Grind Matic Senior
200 x 102 x 32
150 x 80, hard
Grind Matic Senior
200 x 102 x 32
150 x 80, soft
click here to go back to Swing / Senior