AC Distributor GooglePlus
Flags
Flags
Facebook

Halco logoHalco Rock Tools

  6" Dominator 600 cutaway

6" - Dominator 600

Available Shanks: Halco Mach 60, IR DHD 360,
                               Sandvik Mission A53-25

The Dominator 600 is a class leader in performance and is suitable for drilling at a wide range of air pressures, excelling at higher working pressures. Dominator 600 has a unique extended top-adaptor with retract carbides on Ingersoll-Rand and Mission versions for digging out of drilled bores.

Suitable for operation at air pressures of 100 - 435 psi.
Drilling diameters of 6 - 9 5/8".

Click to enlarge
Dominator 600 Air Consumption table
Figures are based on theoretical data.
 
 
Top-adaptor with internal N.R.V. (Non-Return-Valve) replaceable air distributor.
 
Revised chamber volumes and cycle timing to optimize performance.
 
Simplified piston geometry for improved balance and location within the cylinder.
 
 
 
 
 
 
 
 
 
 
 

Dominator 600 part breakdown
Hammer Overview
Hammer Type
Dominator 600
Shank
Halco
Mach 60
Ingersoll Rand
DHD 360
Sandvik Mission
A53-25
Top Thread
3 1/2" API Reg Pin
3 1/2" API Reg Pin
3 1/2" API Reg Pin
Flat Hammer Size
3.544"
3.977"
3.977"
Weight
196.21 lbs.
196.21 lbs.
196.21 lbs.
Outside Diameter
5.472"
5.472"
5.472"
Make Up Length
47.559"
47.559"
47.559"
Recommended   Minimum Thrust
1100 lbs.
1100 lbs.
1100 lbs.
Recommended   Maximum Thrust
3300 lbs.
3300 lbs.
3300 lbs.
Parts List
Hammer Type
Dominator 600
Shank
Halco, IR DHD 360, A53-25
Item
Description
1
Thread Protector
2
Top-Adaptor
3
O-Ring
4
N.R.V.
5
N.R.V. Spring
6
N.R.V. Housing
7
Shim - 4 mm, 5 mm, 6 mm, 7 mm
8
Compression Ring
9
Air Distributor
10
O-Ring
11
Snap Ring
12
Cylinder
13
Piston
14
Snap Ring
15
Bottom Spacer
16
Bit Guide Bush
17
Bit Retaining Ring
18
O-Ring
19
Chuck Spacer
20
Chuck
21
Cap
Service Kit, Repair Kit, Foot Valve, F/V Tool (Body), and F/V Tool (Pusher) available
info

Drill Bits
Sandvik Mission A53-15 / SD6
Size
Face Design
Button Type
Button Qty./Dia.
Weight
6" / 152 mm
Concave
Domed
16 x 16 mm
57.32 lbs.
6 1/2" / 165 mm
Concave
Domed
18 x 16 mm
60.63 lbs.
6 1/2" / 165 mm
Convex
Domed
19 x 16 mm
60.63 lbs.
6 3/4" / 171 mm
Concave
Domed
24 x 16 mm
57.76 lbs.
7" / 178 mm
Flat
Domed
20 x 16 mm
63.93 lbs.*
7 1/2" / 191 mm
Concave
Domed
24 x 16 mm
66.14 lbs.*
8" / 203 mm
Convex
Domed
20 x 16 mm
79.37 lbs.*
8 1/2" / 216 mm
Concave
Domed
22 x 20 mm
79.37 lbs.*
Ingersoll Rand (DHD 360) / Atlas Copco Cop 64
6" / 152 mm
Convex
Domed
20 x 16 mm
55.12 lbs.
6" / 152 mm
Concave
Domed
17 x 16 mm
55.12 lbs.
6 1/2" / 165 mm
Concave
Domed
18 x 16 mm
56.22 lbs.
6 1/2" / 165 mm
Convex
Domed
20 x 16 mm
57.32 lbs.
6 1/2" / 165 mm
Flat
Domed
12 x 16 mm/8 x 16 mm Long
56.88 lbs.
6 1/2" / 165 mm
Flat
Domed
8 x 20 mm/9 x 16 mm Long
57.76 lbs.
6 1/2" / 165 mm
Flat
Domed/Wear
12 x 16 mm/8 x 16 mm L/
8 x 13 mm W
57.76 lbs.
6 1/2" / 165 mm
Convex
Domed
16 x 16 mm/12 x 16 mm Long
55.12 lbs.
6 3/4" / 171 mm
Convex
Domed
6 x 16 mm / 13 x 18 mm
58.42 lbs.
6 3/4" / 171 mm
Concave
Domed
18 x 16 mm
58.42 lbs.
7" / 180 mm
Concave
Domed
18 x 16 mm
60.19 lbs.*
7" / 180 mm
Concave
Domed/S-Ball
8 x 16 mm D/10 x 16 mm S-B
60.19 lbs.*
7 1/2" / 190 mm
Concave
Domed
24 x 16 mm
66.14 lbs.*
7 7/8" / 200 mm
Convex
Domed
21 x 16 mm
76.06 lbs.*
8" / 203 mm
Concave
Domed
31 x 16 mm
77.60 lbs.*
8" / 203 mm
Convex
Domed
20 x 16 mm
77.16 lbs.*
8 5/8" / 220 mm
Concave
Domed
22 x 20 mm
88.19 lbs.*
9 1/2" / 241 mm
Flat
Domed
18 x 16 mm / 10 x 20 mm
110.23 lbs.*
Halco Mach 60 Shank
6" / 152 mm
Convex
Domed
16 x 16 mm
51.81 lbs.
6 1/2" / 165 mm
Convex
Domed
19 x 16 mm
57.32 lbs.
6 3/4" / 170 mm
Flat
Domed
19 x 16 mm
57.32 lbs.
7" / 178 mm
Convex
Domed
18 x 16 mm
66.14 lbs.*
7 1/2" / 191 mm
Convex
Domed
21 x 16 mm
71.65 lbs.*
7 7/8" / 200 mm
Convex
Domed
20 x 16 mm
74.96 lbs.*
8" / 203 mm
Concave
Domed
31 x 16 mm
77.16 lbs.*
8 7/8" / 225 mm
Convex
Domed
26 x 16 mm
92.59 lbs.*
9 5/8" / 245 mm
Convex
Domed
27 x 16 mm
108.03 lbs.*
*Oversize