AC Distributor GooglePlus
Flags
Flags
Facebook

Halco logoHalco Rock Tools

  5" Super Dominator 500 cutaway

5" - Super Dominator 500

Available Shank: IR DHD 350R

Super Dominator 500 is a class leader in performance and is suitable for drilling at a wide range of air pressures, excelling at high working pressures. The Super Dominator 500 has a one piece top-adaptor with N.R.V. (Non-Return-Valve) fitted for easy inspection and service, with integral finger to reduce maintenance and eliminate shimming. The Super Dominator 500 has no liner which increases the piston blow energy and reduces part required.

Super Dominator 500 is ideal for blast hole drilling applications. Super Dominator 500 is simple to maintain and to service with only few simple tools required.

Suitable for operation at air pressures of 100 - 435 psi.
Drilling diameters of 5 - 6 1/2”.

Click to enlarge
Super Dominator 500 Air Consumption table
Figures are based on theoretical data.
One piece top-adaptor
reduces internal parts. No
make up required. External
N.R.V. for easy maintenance.
 
 
 
Revised chamber volumes and
cycle timing to optimize
performance.
 
 
Simplified piston geometry for
improved balance and
location within the cylinder.
 
 
 
 
 
 
 
 
 
 
 

5" Super Dominator 500 part breakdown
Hammer Overview
Hammer Type
Super Dominator 500
Shank
Ingersoll Rand DHD 350R
Top Thread
3 1/2" API Reg Pin
Hammer Flat Size
3.544"
Weight
127.87 lbs.
Outside Diameter
4.65"
Make Up Length
38.40"
Recommended Minimum Thrust
900 lbs.
Recommended Maximum Thrust
1980 lbs.
Parts List
Hammer Type
Super Dominator 500
Shank
DHD350R
Item
Description
1
Thread Protector
2
Snap Ring
3
N.R.V. Seat
4
O-Ring
5
N.R.V.
6
N.R.V. Spring
7
N.R.V. Shield
8
Top-Adaptor
9
O-Ring
10
O-Ring
11
Cylinder
12
Piston
13
Snap Ring
14
Bit Retaining Ring
15
Chuck Lock Ring
16
Chuck Spacer
17
Chuck
18
End Cap
Service Kit, Repair Kit, Foot Valve, F/V Tool (Body), and F/V Tool (Pusher) available
info

Drill Bits
Ingersol Rand Shank - DHD350R / Atlas Copco Cop 54
Size
Face Design
Button Type
Button Qty./Dia.
Weight
5" / 127 mm
Concave
Domed
8 x 13 mm / 8 x 16 mm
35.27 lbs.
5 1/2" / 140 mm
Concave
Domed/Semi-Ballistic
8 x 16 mm / 7 x 16 mm SB
36.16 lbs.
5 1/2" / 140 mm
Flat
Domed
7 x 16 mm / 8 x 16 mm Long
35.71 lbs.
5 1/2" / 140 mm
Convex
Semi-Ballistic
8 x 16 mm SB/8 x 16 mm Long SB
35.05 lbs.
5 3/4" / 146 mm
Concave
Domed
15 x 16 mm
35.94 lbs.
5 7/8" / 150 mm
Concave
Domed/Semi-Ballistic
9 x 16 mm D/10 x 16 mm SB
39.24 lbs.*
6" / 152 mm
Convex
Domed
20 x 16 mm
39.24 lbs.*
6 1/2" / 165 mm
Concave
Domed
10 x 16 mm / 8 x 20 mm
47.18 lbs.*
*Oversize