AC Distributor GooglePlus
Flags
Flags
Facebook

Halco logoHalco Rock Tools

  6" Super Dominator 650 cutaway

6" - Super Dominator 650

Available Shank: IR DHD 360, Sandvik Mission A53-15/SD6

The Super Dominator 650 combines the raw power of the Super Dominator 600 with extended hammer life in abrasive conditions due to its heavy duty outside diameter and reversible cylinder. The unique one piece top-adaptor with N.R.V. (Non-Return-Valve) makes
the hammer easy to inspect and maintain.

Super Dominator 650 requires only few tools to service and maintain the hammer.

Suitable for operation at air pressures of 100 - 435 psi.
Drilling diameters of 6 1/2 - 9 1/2".

Click to enlarge
Super Dominator 650 Air Consumption table
Figures are based on theoretical data.
One piece top-adaptor reduces internal parts. No make up required. External N.R.V. for easy maintenance.
 
Revised chamber volumes
and cycle timing to optimize performance.
 
Simplified piston geometry for improved balance and location within the cylinder.
 
Heavy duty reversible
cylinder for extended
hammer life.
 
 
 
 
 
 
 
 
 

Super Dominator 650 part breakdown
Hammer Overview
Hammer Type
Super Dominator 650
Shank
Ingersoll Rand
DHD 360
Sandvik
Mission A53-5/SD6
Top Thread
3 1/2" API Reg Pin
3 1/2" API Reg Pin
Flat Hammer Size
3.977"
3.977"
Weight
229.28 lbs.
229.28 lbs.
Outside Diameter
5.748"
5.748"
Make Up Length
44.842"
44.842"
Recommended Minimum Thrust
1100 lbs.
1100 lbs.
Recommended Maximum Thrust
3300 lbs.
3300 lbs.
Parts List
Hammer Type
Super Dominator 650
Shank
IR DHD 360, Mission A53-5/SD6
Item
Description
1
Thread Protector
2
Snap Ring
3
N.R.V. Seat
4
O-Ring
5
N.R.V.
6
N.R.V. Spring
7
N.R.V. Spring Shield
8
Top-Adaptor
9
O-Ring
10
O-Ring
11
Cylinder
12
Piston
13
Snap Ring
14
Bottom Spacer
15
O-Ring
16
Bit Guide Bush
17
Bit Retaining Ring
18
O-Ring
19
Chuck Spacer
20
Chuck
21
End Cap
Service Kit, Repair Kit, Foot Valve, F/V Tool (Body), and F/V Tool (Pusher) available
info

Drill Bits
Ingersoll Rand Shank - DHD360 / Atlas Copco Cop 64
Size
Face Design
Button Type
Button Qty./Dia.
Weight
6 1/2" / 165 mm
Concave
Domed
18 x 16 mm
59.22 lbs.
6 1/2" / 165 mm
Convex
Domed
20 x 16 mm
57.32 lbs.
6 1/2" / 165 mm
Convex
Domed
16 x 16 mm / 12 x 16 mm Long
55.12 lbs.
6 3/4" / 171 mm
Concave
Domed
18 x 16 mm
58.42 lbs.
7" / 180 mm
Concave
Domed
18 x 16 mm
60.19 lbs.*
7 1/2" / 190 mm
Concave
Domed
24 x 16 mm
66.14 lbs.*
7 7/8" / 200 mm
Convex
Domed
21 x 16 mm
76.06 lbs.*
8" / 203 mm
Concave
Domed
31 x 16 mm
77.60 lbs.*
8 5/8" 220 mm
Concave
Domed
22 x 20 mm
88.18 lbs.*
9 1/2" / 241 mm
Flat
Domed
18 x 16 mm / 10 x 20 mm
110.23 lbs.*
Sandvik Mission A53-15 / SD6
6 1/2" / 165 mm
Concave
Domed
18 x 16 mm
60.63 lbs.
6 1/2" / 165 mm
Convex
Domed
19 x 16 mm
60.63 lbs.
6 3/4" / 171 mm
Concave
Domed
24 x 16 mm
57.76 lbs.
7" / 178 mm
Flat
Domed
20 x 16 mm
63.93 lbs.*
7 1/2" / 191 mm
Concave
Domed
24 x 16 mm
66.14 lbs.*
8" / 203 mm
Convex
Domed
20 x 16 mm
79.37 lbs.*
8 1/2" / 216 mm
Concave
Domed
22 x 20 mm
79.37 lbs.*
*Oversize