AC Distributor GooglePlus
Flags
Flags
Facebook

Halco logoHalco Rock Tools

  6" Super Dom 650 HD QL 60 cutaway

6" - Super Dominator 650 HD QL 60

Available Shank: IR QL 60

The Super Dominator 650 HD QL 60 has been designed to give maximum performance in blast-hole applications. This hammer has been tuned to efficiently utilize the air supply to give optimum penetration rates. The Super Dominator 650 HD QL 60 is suitable for drilling over a wide range of air pressures, excelling at higher pressures.

The unique top-adaptor with N.R.V. (Non-Return-Valve) makes this hammer easy to maintain and service.

Suitable for operation at air pressures of 100 - 435 psi.
Drilling diameters of 6 1/2 - 9 1/2".

Click to enlarge
Super Dominator 650 HD QL 60 Air Consumption table
Figures are based on theoretical data.
 
One piece top-adaptor reduces internal parts. No make up required.
 
 
Revised reversible chamber volumes and cycle timing to optimize performance.
 
Simplified piston geometry for improved balance and location within the cylinder.
 
Reversible cylinder.
 
 
 
 
IR QL 60 shank reduces contact stresses and
wear rates.
 
 
 

Super Dominator 650 HD QL part breakdown
Hammer Overview
Hammer Type
Super Dominator 650 HD QL 60
Shank
Ingersoll Rand QL 60
Top Thread
3 1/2" API Reg Pin
Flat Hammer Size
3.977"
Weight
220.46 lbs.
Outside Diameter
5.748"
Make Up Length
41.07"
Recommended Minimum Thrust
1100 lbs.
Recommended Maximum Thrust
3300 lbs.
Parts List
Hammer Type
Super Dominator 650 HD
Shank
QL 60
Item
Description
1
Thread Protector
2
Snap Ring
3
N.R.V. Seat
4
O-Ring
5
Non-Return Shuttle Valve
6
N.R.V. Spring
7
N.R.V. Spring Shield
8
Integral Top-Adaptor
9
O-Ring
10
O-Ring
11
Cylinder
12
Piston
13
Snap Ring
14
O-Ring
15
Bit Guide Bush
16
Bit Retaining Ring
17
Chuck
18
Repair Kit
Service Kit, Repair Kit, Foot Valve, F/V Tool (Body), and F/V Tool (Pusher) available
info

Drill Bits
Ingersoll Rand Shank - DHD360 / Atlas Copco Cop 64
Size
Face Design
Button Type
Button Qty./Dia.
Weight
6 1/8" / 156 mm
Concave
Domed
16 x 16 mm
51.15 lbs.
6 1/2" / 165 mm
Concave
Domed
18 x 18 mm
53.79 lbs.
6 3/4" / 171 mm
Convex
Domed
19 x 18 mm
55.78 lbs.
7" / 178 mm
Concave
Domed
8 x 20 mm + 11 x 16 mm
57.76 lbs.*
7 1/2" / 190 mm
Concave
Domed
24 x 16 mm
69.89 lbs.*
8" / 203 mm
Concave
Domed
31 x 16 mm
75.18 lbs.*
9 1/2" / 241 mm
Concave
Domed
18 x 20 mm / 10 x 16 mm
87.08 lbs.*
*Oversize