AC Distributor GooglePlus
Flags
Flags
Facebook

Missile LXQ Series - LXQM6000 6" Hammer SD6 Shank


Hammer Specifications - SD6 Shank

 

LXQ SD6 Hammer
Item #
Description Part #
1
Back Head LQ6001
2
Back Head O-Ring LQ6002
3
Choke  
4
Air Check Valve LQ6004
5
Air Check Valve Spring LQ6005
6
Buffering Washer (Steel) LQ6006
7
Make-Up Rubber (Buffering) LQ6007
8
Air Distributor LQ6008
9
Air Distributor O-Ring LQ6009
10
Cylinder LQ6010
11
Wear Sleeve LQM6011
12
Piston LQM6012
13
Piston Stop Ring LQ6013
14
Bit Retaining O-Ring LQM6014
15
Bit Retaining Ring LQM6015
16
Chuck (Drive Sub) LQM6016
  Choke Plug Kit LXQ1000
  O-Ring Kit LXQ6022

Features:

 

  • Easy to service
  • Special heat-treated alloy piston for long life, Rockwell hardness 60
  • Reversible wear sleeve
  • Minimum loss of performance when injecting foam or water; drills well under water

 

Length (w/o drill bit)
49.252"
Missile LXQ logo


AWDS logo
Outside Diameter
5.413"
Weight (w/o bit)
225.69 lbs.
Cylinder Bore
4.268"
Piston O.D.
4.263"
Piston Stroke
4.527"
Piston Weight
45.92 lbs.
Hole Sizes
6" - 8"
Air Pressure Consumption
150 psi - 400 psi
Wrench Size
A/F 3.968"
Connection
Std. 3 1/2" API Reg Pin

 


Air Consumption Chart

PSI
150
200
250
300
350
400
CFM with blank choke
350
510
665
825
1,990
-
with 1/8" choke
385
570
735
915
1,090
-
with 1/4" choke
440
650
830
1,009
1,190
-

All Hammers come Fitted with Blank Choke located in the Dart Valve

pdfClick here to download brochurepdf




Lubrication

The Missile LXQ Series Hammers are precision-made tools and should be treated as such. Only the highest quality lubrication should be used and a constant flow of oil must be maintained at all times. Recommended lubrication amount 1 Pint per 100 cfm per hour.

Recommended Grades of Lubricant

ESSO
MATEX
CASTROL
SHELL
MOBILE
AROX EP 150
RDO 302
RD OIL DP 100
AIR TOOL OIL S2 A 320
ALMO NO. 5

Heavy duty oil is recommended for all year-round use, in particular where air supply to the hammer is at high temperature. If lighter grade oil is required due to very low ambient temperatures, amount of oil being used should be increased by 30 percent.

Recommended Pull Down

Minimum @ 100 psi - 2660 lbs.
Maximum @ 350 psi - 6510 lbs.

Missile Warranty will be voided by the following:

  1. Welding on Wear Sleeve.
  2. Heating Case with a Torch.
  3. Gripping Wrenches across Threads.
  4. Hammering on Casing.

READ WARNING LABEL ATTACHED TO HAMMER.

Request info



Blue line

Related Products