AC Distributor GooglePlus
Flags
Flags
Facebook

Super-Tac Premium Rock Drill Oil

 

Atlas Copco Rock Drilling Tools - Secoroc Down-the-Hole Equipment

 

Maintain Performance and Reliability

 

Atlas Copco's Super-Tac rock drill oils are engineered and developed for the unique requirements of today's high performance DHDs. Pressure, power, and performance are higher today than ever before, and you need an oil you can count on. Super-Tac can handle internal loading and contact pressure like no other oil available. It performs so well that Atlas Copco offers an extended warranty for the internal parts of DHDs lubricated with Super-Tac.

 

Drill Rig, Super-Tac

 

Super-Tac Premium Rock Drill Oil

 

Hammer Pressure
Ambient or Hammer Inlet Air Temperature (1)
DEG F
DEG C
DEG F
DEG C
DEG F
DEG C
DEG F
DEG C
PSI
BAR
-16 to 20
-26 to 7
20 to 60
7 to 16
60 to 90
16 to 32
Above 90
Above 32
0 to 150
0 to 10
Light
Medium
Heavy
Heavy
150 to 250
10 to 17
Light
Medium
Heavy
Extra Heavy
250 to 400
17 to 28
Medium
Heavy
Extra Heavy
Extra Heavy

Grade
ISO Grade
Approx.
Viscosity
(Cst@40C)
Viscosity
Index (typ)
Pour Point
Max F (C)
Flash Point
Min F (C)
Emulsion
Min to 35 ml
Test Reference-ASTM
D2270
D97
D92
D1401
Test Reference-ISO
2909
3104
2592
3488
Light
100
90-110
124
-16F-26C
460F/237C
>60
Medium
220
198-242
121
0F/-17C
457F/236C
>60
Heavy
460
380-430
94
10F/-12C
455F/235C
>60
Extra Heavy
680
560-610
94
10F/-12C
455F/235C
>60

 

Notes:

 

  1. The temperature basis for selecting oil is based upon the ability for venturi or plunger lubricators to reliably dispenses oil at temperature. If this is not a limitation, select heavier oils based on hammer air pressure. Note that the lubricated regions of most DHDs and drifters are operating in excess of 150F.
  2. Atlas Copco recommends injecting 1/3 pint per hour for every 100 acfm of air delivered. Or, 1/4 liter per hour for each 5m"3/min." These amounts should be doubled when injecting more than 2 gpm of water.

 

Copper Blend High Temperature Drill Pipe Lubricant

 

  • Contains no lead or zinc.
  • Formulated with a proprietary blend of copper, graphite, and other additives for unequaled protection and prevention of excessive circumferential makeup in hostile drilling environments.
  • Inhibitors protect against rust and corrosion.
  • Aluminum complex grease base for brushability and stability over a wide temperature range.
  • Adheres to oily threads.
  • Applies easily with brush.

Request info