AC Distributor GooglePlus
Flags
Flags
Facebook

Handheld Hydraulic Equipment

High-performance products. Designed for you!

Are you saying that hydraulic tools can make my job easier?

Absolutely. The manufacturer supplies a complete line-up -- and you won't believe how convenient, portable, and versatile they are, particularly if you travel to a new site every day, do the job in hours, and then move on. Take the power source, for instance. Instead of towing a heavy compressor, you have a compact, portable hydraulic power pack.

Cut-Off Saw in useOk, but do these tools have the power I need?

You will be pleasantly surprised. With hydraulic tools you get raw power from the power pack directly into the tool. They not only feel more powerful, but they actually outperform other comparable tools. Take our 16-inch saw. At full throttle you have all the power of an 18 HP engine in your hand in a tool weighing only 23 pounds.

For building renovation, highway maintenance, utilities, and all situations where portability and flexibility can save time and effort, hydraulic tools are the solution. Use them anywhere, independent of electric or pneumatic supply, in all weather conditions.

Bet they cost an arm and a leg!

No. In fact for many construction and rental companies, there are major cost advantages. For instance, for the price of one compressor/breaker combination you can purchase two complete hydraulic power pack/breaker packages.

Handheld Hydraulic Equipment, Power Pack, Submersible Pump

This power pack sure looks portable!

Power PackExactly. Why tow a large compressor to the site if you don't need to? This hydraulic power pack couldn't be more convenient. For site-to-site transportation, two people can lift it into a truck. On-site this power pack can easily be wheeled around by one person.

These hydraulic power packs are available in gasoline, diesel, or electrically driven versions and provide portable power for a long list of applications in the 5-10 gpm/2000-2500 psi range.

How are they to operate?

Couldn't be simpler. The thermostatically controlled oil cooler gives fast warm-up and helps prevent the hydraulic oil from overheating. Correct working temperature is achieved within minutes -- even during the winter. The variable flow on/off valve enables simple tool change and slow start up. A gauge shows when it's time to change the filter.

What about fuel consumption?

Many of the power packs are equipped with Power on Demand. This system automatically idles the engine when the tool is not being used and speeds it up when the tool is activated. It saves fuel and keeps noise to a minimum.

Power Packs
PAC P9
PAC P13
Engine  
9 HP, Honda gasoline
13 HP, Honda gasoline
Weight (incl. oil)
lb.
143
200
Dimensions (L x W x H)
in.
23.0 x 20.7 x 26.8
27.7 x 23.6 x 29.3
Oil flow
gpm
5
5 - 8
Maximum pressure
psi
2200
2200
Fuel capacity
U.S. gal.
1.5
1.8
HTMA Type  
I
I / II
Hose included  
NO
NO
Power on Demand (POD)  
YES
YES
Oil control: engine oil  
YES
YES
Electric start  
NO
NO

Power Packs
PAC P18
PAC D10
Engine  
18 HP, B&S Vanguard gasoline
10 HP, Lombardini diesel
Weight (incl. oil)
lb.
243
256
Dimensions (L x W x H)
in.
28.3 x 27.6 x 29.3
27.7 x 23.6 x 29.3
Oil flow
gpm
5 - 10
5
Maximum pressure
psi
2200
2000
Fuel capacity
U.S. gal.
1.9
1
HTMA Type  
I / II / RR
1
Hose included  
NO
NO
Power on Demand (POD)  
NO
NO
Oil control: engine oil  
NO
NO
Electric start  
YES
YES

Not sold within EU.

Hydraulic Breakers - A team of real hard-hitters

Hydraulic BreakerLooking for flexibility -- or just raw power?

Either way, you've found it. These hydraulic breakers range from flexible, lightweight models up to super heavy duty models hitting at 103 foot pounds and delivering an average of 1,276 blows per minute. Whatever the job, large or small, light or heavy, the manufacturer has the right tool in its breaker line-up.

Get more done!

The slim design of these hydraulic breakers gives a good line of sight to the working tool point, which boosts your productivity. The tools are well balanced, with no external side bolts and protruding machine parts that can come into contact with the operator's body.

Quick couplings

Hoses are fitted with flat-face HTMA quick release couplings for fast and easy connections in all work situations. The couplings are designed to help keep hydraulic systems clean on work sites where there are large amounts of dust and dirt.

BRK 25 D - A powerful horizontal pick hammer

Get a grip on horizontal tasks! With an impact energy of 18 foot pounds and giving 2,400 blows/min., the BRK 25 D D-handle hammer is the powerful choice for horizontal work in renovation, demolition, and structural alteration. The detachable front handle, available as an optional extra, pivots 360° for optimal positioning.

Pick hammer
BRK 25 D
Shank size
Hex in.
7/8 x 3 1/4
Weight
lbs.
28
Length
in.
24
Oil flow
gpm
5
Working pressure
psi
1000 - 1300
Return line pressure max.
psi
150
Vibration level (ISO 8662-5)
m/s2
10.1
Impact rate (5 gpm)
blows/min.
2400
HTMA class  
I

Hydraulic Breaker in useBRK 40 - Lightweight, multi-purpose breakers

The perfect choice for indoor and outdoor renovation and demolition jobs, BRK 40 breakers have an impact energy of 48 foot pounds at 1,600 blows/min. Brickwork, frozen soil, asphalt, and concrete are no match for these tough, lightweight breakers. Frequently chosen by contractors and rentals, BRK 40 breakers are also effective for tamping and compaction and are used by railroad companies for tie tamping applications.

BRK 55 - Medium weight, multi-purpose breakers

A favorite with rental companies, BRK 55 breakers are the ideal choice for road building and maintenance applications. Whether it's asphalt, brickwork, frozen soil, or concrete, the BRK 55 gives you reliable performance. Can be used with both 8 gpm and 5 gpm power packs.

BRK 70 - Heavy-duty, multipurpose breakers

Get the job done, fast! BRK 70 breakers are ideal for heavier jobs in tough materials such as asphalt, frozen soil, and reinforced concrete. They work at a standard flow of 8 gpm and at 5 gpm with a simple adjustment.

BRK 95 - Super heavy-duty breakers

Handheld breakers don't get much more powerful than this. With an impact energy of 103 foot pounds and an impact rate of 1,275 blows/min., in some situations the BRK 95 can even replace small excavators with breaker attachments. Ideal for breaking heavy asphalt, reinforced concrete, and foundations, these powerful machines are the rugged choice for utility construction, street maintenance, repair of water and gas lines, and general construction jobs.

Breakers
BRK 40
BRK 40 VR
BRK 55
BRK 55 VR
Weight
lbs.
41
42
46
47
Length
in.
25
25
27
27
Oil flow
gpm
5
5
8*
8*
Working pressure
psi
1300 - 1600
1300 - 1600
1500 - 1800
1500 - 1800
Return line pressure max.
psi
150
150
215
215
Vibration level (ISO 8662-5)***
m/s2
8.3
3.5
11.4
3.3
Impact rate (5 gpm)
blows/min.
1600
1600
1450
1450
Impact rate (8 gpm)
blows/min.
-
-
2160
2160
Impact rate (10 gpm)
blows/min.
-
-
-
-
HTMA class  
I
I
II (I)*
II (I)*

Breakers
BRK 70
BRK 70 VR
BRK 95
BRK 95 VR
Weight
lbs.
56
57
71
73
Length
in.
30
30
30
30
Oil flow
gpm
8*
8*
8**
8**
Working pressure
psi
1500 - 1800
1500 - 1800
1500 - 1800
1500 - 1800
Return line pressure max.
psi
215
215
215
215
Vibration level (ISO 8662-5)***
m/s2
11.4
3.4
14.2
6.0
Impact rate (5 gpm)
blows/min.
1270
1270
-
-
Impact rate (8 gpm)
blows/min.
1860
1860
1150
1150
Impact rate (10 gpm)
blows/min.
-
-
1500
1500
HTMA class  
II (I)*
II (I)*
II (RR)**
II (RR)**

    *Can be adjusted to 5 gpm
  **Can be adjusted to 10.5 gpm
***BRK 40, BRK 55, and BRK 70 measured at 5 gpm/min., BRK 95 measured at 8 gpm/min.

High back pressure version
BRK 40
BRK 40 VR
BRK 55
BRK 55 VR
Return line pressure max.
psi
     
435

High back pressure version
BRK 70
BRK 70 VR
BRK 95
BRK 95 VR
Return line pressure max.
psi
 
435
   

Hydraulic saws and drills -- perfect working partners

Cut-Off Saw in useCut-off saws - You name it, these cut-off saws will cut it

They may be light and compact, but don't be fooled. A hydraulic cut-off saw with the right blade will cut through concrete, asphalt, and steel. With our 16-inch saw at full throttle you have the raw power of a gasoline-powered engine in your hand.

The open cutting face makes the this cut-off saw easy to use, even under the most demanding conditions. The simple, direct drive configuration reduces maintenance, especially in comparison with belt-driven saws.

A water kit is available to provide a supply of cooling water where needed.

Cut-off saws
SAW 14
SAW 16
Weight
lb.
21.6
23.4
Oil flow
gpm
5 - 8
5 - 10
Max. oil pressure
psi
2500
2500
Revolutions
rpm
2500 - 4000
2000 - 4000
Circumferential speed
ft/s
151 - 246
138 - 279
Blade size
in.
14
16
Arbor hole diameter
in.
1
1
Cutting depth when used handheld
in.
5.2
6.3
Cutting depth when mounted in cart
in.
3.9
4.9
HTMA Type  
I / II
I / II / RR

Core Drill in useCore drills - Ideal for working in confined areas

Take a hydraulic core drill with you when installing drainage, sewer and water pipes, or cable and ventilation ducts where large, deep holes are needed. These core drills are well suited for drilling concrete, masonry, and asphalt materials. They can be operated freehand or mounted in a drill stand.

Hydraulic control of the drill torque helps to reduce kickback when drill bits jam. So you're in control, even when drilling holes of 8 inch in diameter and above. Due to the compact design of this core drill, you can easily drill holes of up to 8 inch freehand.

Core drills
COR 5
COR 15
Weight
lb.
18
18
Oil flow
gpm
5 - 8
5 - 8
Length without drill
in.
16
16
Working pressure
psi
1160 - 2500
1160 - 2500
Revolutions
rpm
600 - 900
1500 - 2250
Drill diameter
in.
2 - 8
0.5 - 3
Thread female (drive)*  
1/2" BSP
1/2" BSP
HTMA Type  
I / II
i / II

* 1/2" BSP male x 1 1/4 UNC male drive adaptor included for use of larger diameter core bits.

Water kit

Diamond blades and core bits need a constant supply of water to cool, flush away slurry, and suppress dust. On remote sites where there is no water supply, we recommend this water kit, a small pressurized water container.

It takes more than stones and debris to stop this submersible pump!

Submersible PumpSubmersible pumps - These tools are really tough

These hydraulic submersibles are a range of rugged pumps for continuous pumping of water on building sites, in flooded excavations and cellars, and similar situations. Performance is impressive in relation to size and weight.

The 2 inch pump handles dirty water containing small stones and debris up to 10 mm. The 3 inch submersible trash pump can handle rocks of up to 2 1/2 inch diameter!

 

Cooled and lubricated by the hydraulic oil, they can be left to run dry without damage.

Water pumps
WAP 2
WAP 3
Weight
lb.
22.6
28
Dimensions H x W
in.
10.5 x 8.5
14.2 x 11.8
Oil flow
gpm
4 - 6
7 - 10
Working pressure
psi
1400
2000
Max. working pressure
psi
2300
2500
Pump head max.
ft.
82
105
Pump flow max.
gal./min.
222
507
Discharge
in.
2" BSP
3" BSP
Solid handling up to
in.
3/8"
2 1/2"
HTMA Type  
I
II

Oil Divider and Extension Hose

Accessories -- for your hydraulic tools

Oil flow divider

Reduces flow and pressure, allowing you to run tools from hydraulic-powered carriers. Use an extension hose to connect the oil flow divider to the tool.

Extension hoses

Add one or two 23 ft. extension hoses and you can use up to 69 ft. of hose without significant drop in pressure. The hoses are fitted with flat-face, quick release couplings.

 

 

Oil flow divider
OFD 5
OFD 8
 
Hoses
ft.
23
39
Max. oil flow rate
gpm
15.8
31.0
Flat-face quick couplings
dimension
1/2"
1/2"
Regulated oil flow rate
gpm
5.3 - 6.6
6.6 - 8
HTMA Type  
I
II
HTMA Class  
I / II / RR
I / II / RR

Working tools

 
Flat to flat (North America)
 
7/8 x 3 1/4 in.
1 x 4 1/4 in.
 
W (in.)
L (in.)
W (in.)
L (in.)
Moil point  
14
 
15
   
18
 
18
   
24
 
24
   
36
 
36
Narrow chisel
1
14
1 1/8
15
 
1
18
1 1/8
18
 
1
24
1 1/8
24
 
1
36
1 1/8
36
Wide chisel
3
14
3
15
 
3
18
3
18
 
3
24
3
24
Wedge chisel
1 3/8
15
2
15
Digging chisel
3
14
3
15
Digging spade
4 3/4
13
4 3/4
13
Asphalt cutter
5
12
5
13
Clay spade
5
17
5
16
Shaft for pad  
8
 
11
Tamping pad, round
7
 
7
 
Tamping pad, square
7
 
7
 
Tamping pad, square        
Driver pad, round
4
 
4
 

 
Point to flat (North America)
 
1 1/8 x 6 in.
1 1/4 x 6 in.
 
W (in.)
L (in.)
W (in.)
L (in.)
Moil point  
14
 
14
   
18
 
18
   
24
 
24
   
36
 
36
Narrow chisel
1 1/4
14
1 3/8
14
 
1 1/4
18
1 3/8
18
 
1 1/4
24
1 3/8
24
 
1 1/4
36
1 3/8
36
Wide chisel
3
15
3
15
 
3
18
3
18
 
3
24
3
24
Wedge chisel
2
16
2
16
Digging chisel
3
15
3
15
Digging spade
5
13
5
13
Asphalt cutter
5
13
5
13
Clay spade
5 1/2
15
5 1/2
15
Shaft for pad  
9
 
9
Tamping pad, round
7
 
7
 
Tamping pad, square
6
 
6
 
Tamping pad, square
8
 
8
 
Driver pad, round        

Classification of tools

Flow
5 gpm
8 gpm
10 gpm
HTMA
I
II
RR
EHTMA
C
D
E