Steel Casing Elevators

AWDS Elevator

AWDS Casing Elevators


AWDS Elevators Group
AWDS Elevator

Size Cap (tons) Wgt (lbs.) Sling Size
6 5/8" 20 35 3/4"
8 5/8" 40 50 3/4"
10 3/4" 40 95 7/8"
12 3/4" 40 110 7/8"


Easy Lift

Easy Lift Elevators

These casing elevators provide a positive grip onto the casing without the need to weld on tabs. The carbide teeth dig into the casing on two sides.  The entire process is faster because you do not have to weld on and then remove tabs.

Available for 6" and 8" casing.

Bridle with 8 inch Casing Elevator


VE Series Ambidextrous Elevators

For efficiency, safety, and dependability, choose our high-grade steel elevators. These elevators are specially designed from years of experienced engineering for casing and turbine pump pulling and setting. Each elevator has a positive spring-loaded "pop together" latch with safety shield to prevent accidental line interference. Sizes are available for all casing pipe. We also take custom orders for your specific needs. Cable-type eye-to-eye slings (and clevis if needed) are included with every order.
VE Series Elevators are ambidextrous (open to the right or left) pipe handling elevators.  Available sizes range from 1 1/4" - 24".  Custom sizes available.  Load test certifications are also available upon request for an additional fee.

VE Elevator
VE Slings
VE Elevator open

Size Cap (tons) Wgt (lbs.) Dimensions (inches) Sling Size
1 1/4" 10 31 7 x 7 x 4 5/8"
1 1/2" 10 31 7 x 7 x 4 5/8"
2 3/8" 10 31 7 x 7 x 4 5/8"
2 7/8" 10 31 7 x 7 x 4 5/8"
3 1/2" 20 31 8 x 8 x 4 5/8"
4 1/2" 20 35 10 x 9 x 5 5/8"
5 1/2" 20 40 11.5 x 10 x 5 3/4"
5 9/16" 20 40 11.5 x 10 x 5 3/4"
6 5/8" 20 60 13.5 x 13 x 6 3/4"
7" 20 72 14.5 x 13 x 6 3/4"
8 5/8" 20 80 16 x 15 x 7 3/4"
9 5/8" 30 110 17 x 16 x 7 7/8"
10 3/4" 30 125 18 x 18 x 7 7/8"
12 3/4" 40 140 20 x 19 x 7 1"
13 3/8" 40 140 20 x 19 x 7 1"
14" 40 140 21 x 21 x 7 1"
16" 40 155 24 x 23 x 7 1"
17 3/4" 40 200 25 x 25 x 7 1"
18" 40 200 26 x 25 x 8 1"
18 5/8" 40 200 26 x 25 x 8 1"
20" 40 1"
22" 40 1"
24" 40 1"


Clamp On Lifters

These clamp on style casing lifters come in pairs and have a lifting capacity of 4.5 tons. They are able to accomodate pipe/casing of up to 0.500" wall thickness.
Each pair consists of: Clamps, clevises and slings.

 

Clamp On Casing Lifter Picture

 

Clamp On Casing Lifter Picture


Casing Elevator

Bale Style Elevators

These elevators are easy to use after you weld tabs onto the casing. Flip the retainer out of the way and swing the slip open. Close around the casing and flip the retainer back into position.
Bales not included on 10", 12", or 14" elevators.

*** Load Certified ***


Pipe Elevator Dimension chart
Standard Manufacturing Pipe Elevator Dimensions
Sizes A B C D E F
1 5/8 3 12 3/4 7 1 7/16 7 1/2
1 1/4 5/8 3 12 3/4 7 1 3/4 8
1 1/2 5/8 3 12 3/4 7 2 8 1/4
2 5/8 3 12 3/4 7 2 1/2 9 1/4
2 1/2 3/4 3 12 1/4 6 1/2 3 9 1/2
3 3/4 3 12 1/4 6 1/2 3 5/8 11
3 1/2 3/4 3 12 1/4 6 1/2 4 1/8 11 5/8
4 3/4 3 12 1/4 6 4 5/8 12 3/4
4 1/2 3/4 3 12 1/2 6 5 1/8 13
5 3/4 3 12 1/2 6 5 11/16 13 1/2
6 7/8 3 18 1/2 11 8 3/4 14 1/2
8 1 1/4 3 21 1/2 11 1/2 8 3/4 18 1/4
10 - - - - 10 7/8 21 1/4
12 - - - - 12 7/8 23 1/2
14 - - - - 14 1/8 29 1/2
All above dimensions in inches. Custom bales
available upon request.