G-Force Nova GFNR5500 IR350 Shank

Hammer Specifications - G-Force Nova IR350 Shank

Features:

No foot valve required
Easy to service
Special heat-treated alloy piston for long life, Rockwell hardness 60
Minimum loss of performance when injecting foam or water

Item #	Description	Part #
1	Back Head	GFN5501
2	Back Head O-Ring	GFN5502
3	Air Check Valve	GFN5503
4	Air Check Valve Spring	GFN5504
5	Air Guide Washer	GFN5505
6	Make-up Rubber	GFN5506
7	Air Guide Plug (Choke)	GFN5507
8	Air Guide	GFN5508
9	Air Guide O-ring	GFN5509
10	Air Distributor	GFN5510
11	Air Distributor O-ring	GFN5511
12	Cylinder	GFN5512
13	Wear Sleeve	GFNR5513
14	Piston	GFNR5514
15	Piston Stop Ring (Buffering)	GFN5515
16	Bit Bearing O-Ring	GFN5516
17	Bit Bearing	GFNR5517
18	Bit Retainer O-Ring	GFN5518
19	Bit Retainer	GFNR5519
20	Chuck (Drive Sub)	GFNR5520

Specifications

Length (w/o drill bit)	39.8"
Outside Diameter	4.88"
Weight (w/o bit)	146.4 lbs.
Cylinder Bore	3.547"
Piston O.D.	3.54"
Piston Stroke	2.09"
Piston Weight	32.5 lbs
Hole Sizes	5 1/8" - 6"
Air Pressure Consumption	150 psi - 450 psi
Wrench Size	A/F 3.47"
Connection	Std. 3 1/2" API Reg Pin

Air Consumption Chart

PSI	150	200	250	300	350	400
CFM with blank choke	343	481	618	748	893	1,031
with 1/8" choke	388	528	668	808	948	1,088
with 1/4" choke	4232	578	733	888	1,043	1,198

All Hammers come Fitted with Blank Choke located in the Air Check Valve

Click here to download brochure

Lubrication

G-Force Series Hammers are precision-made tools and should be treated as such. Only the highest quality lubrication should be used and a constant flow of oil must be maintained at all times. Recommended lubrication amount 1/3 Pint per 100 cfm per hour.

Recommended Grades of Lubricant

ESSO
MATEX
CASTROL
SHELL
MOBILE

AROX EP 150
RDO 302
RD OIL DP 100
AIR TOOL OIL 2 A 320
ALMO NO. 5

Heavy duty oil is recommended for all year-round use, in particular where air supply to the hammer is at high temperature. If lighter grade oil is required due to very low ambient temperatures, amount of oil being used should be increased by 30 percent.

Recommended Pull Down

Minimum @ 100 psi - 750 lbs.

Maximum @ 350 psi - 2500 lbs.

Missile Warranty will be voided by the following:

Welding on Wear Sleeve.
Heating Case with a Torch.
Gripping Wrenches across Threads.
Hammering on Casing.