Missile LXQ Series - LXQM15000-H H150 Shank

Hammer Specifications - LXQ H150 Shank

Features:

Easy to service
Special heat-treated alloy piston for long life, Rockwell hardness 60
Minimum loss of performance when injecting foam or water

Item #	Description	Part #
1	Back Head	LQ1501H
2	Back Head O-Ring	LQ1502H
3	Back Head Washer
4	Choke	LQ1504H
5	Air Check Valve	LQ1505H
6	Air Check Valve Spring	LQ1506H
7	Buffering Washer	LQ1507H
8	Buffering Ring	LQ1508H
9	Air Distributor	LQ1509H
10	Air Distributor O-Ring	LQ1510H
11	Cylinder	LQ1511H
12	Wear Sleeve	LQ1512H
13	Piston	LQ1513H
14	Piston Stop Ring	LQ1514H
15	Bit Retaining O-Ring	LQ1515H
16	Bit Retaining Ring	LQ1516H
17	Chuck Washer	LQ1517H
18	Chuck	LQ1518H
19	Drive Pin	LQ1519H
	Choke Plug Kit	LQ1529H
	O-Ring Kit	LQ1530H

Specifications

Length (w/o drill bit)	69.41"
Outside Diameter	12.6"
Weight (w/o bit)	1,878 lbs.
Cylinder Bore	9.449"
Piston O.D.	9.442"
Piston Stroke	4.92"
Piston Weight	338.19 lbs.
Hole Sizes	15" - 20"
Air Pressure Consumption	100 psi - 250 psi
Wrench Size	-
Connection	Std. 8 5/8" API Reg Pin

Air Consumption Chart

PSI	100	150	200	250	300	350
CFM with blank choke	800	1,100	1,650	2,110	-	-
with 1/8" choke	-	-	-	-	-	-
with 1/4" choke	-	-	-	-	-	-

All Hammers come Fitted with Blank Choke located in the Air Check Valve

Click here to download brochure

Hammer Service Log

Wear Sleeve / Piston Clearance

Part	New Dimension		Discard Clearance
Wear Sleeve	A	9.449"	greater than or equal to 0.010"
Piston OD	B	9.442"	greater than or equal to 0.010"

Inner Cylinder / Piston Clearance

Part	New Dimension		Discard Clearance
Cylinder ID	C	7.874"	greater than or equal to 0.010"
Piston OD	D	7.867"	greater than or equal to 0.010"

Distributor Probe / Piston ID Clearance

Part	New Dimension		Discard Clearance
Distributor Probe OD	F	2.551"	greater than or equal to 0.010"
Piston ID	E	2.559"	greater than or equal to 0.010"

Lubrication

LXQ Series Hammers are precision-made tools and should be treated as such. Only the highest quality lubrication should be used and a constant flow of oil must be maintained at all times. Recommended lubrication amount 1/3 Pint per 100 cfm per hour.

Recommended Grades of Lubricant

ESSO
MATEX
CASTROL
SHELL
MOBILE

AROX EP 150
RDO 302
RD OIL DP 100
AIR TOOL OIL 2 A 320
ALMO NO. 5

Heavy duty oil is recommended for all year-round use, in particular where air supply to the hammer is at high temperature. If lighter grade oil is required due to very low ambient temperatures, amount of oil being used should be increased by 30 percent.

Missile Warranty will be voided by the following:

Welding on Wear Sleeve.
Heating Case with a Torch.
Gripping Wrenches across Threads.
Hammering on Casing.