AC Distributor GooglePlus
Flags
Flags
Facebook
Under Construction We are currently redesigning our website to be more mobile device friendly. You may encounter various page configurations as you move throughout the site. Thank you for your patience as we always strive to give you the best website experience.

Sim-Cas Super 88

Available Shanks: Mach 80, A63-15 (SD8), IR DHD 380

The Sim-Cas Super 88 Shoedrive system is designed to be used with either threaded or welded casing, with a recommended outside diameter of 10 3/4" and an inside diameter of 10". When in operation the eccentric bit extends to produce a bore size of 12 1/8", reducing to 9 1/4" when it is retracted.

The casing drive shoe is available with either a spigot-type connection or a face butting-type connection. The internal diameter of the casing drive shoe is 9.33". This enables a button bit with a diameter of 9.29" (or less) to be used to drill through the casing if required.

An optional stabilizer is available.

Technical Specifications - Sim-Cas Super 88
Description
Sim-Cas Super 88
Eccentric Bit - Reamer Diameter Extended
12.13"
Eccentric Bit - Reamer Diameter Retracted
9.25"
Casing - Recommended O/D
10.7"
Casing - Minimum I/D
10.0"
Casing - Minimum Wall Thickness
0.36"
Casing - Shoe Minimum I/D
9.33"

info


Sim-Cas Super 88 part breakdown
Parts List - Mach 80, A63-15 (SD8), IR DHD 380
Sim-Cas Super 88 part breakdown
1
Eccentric Bit
2
Driver
3
Drive Shoe (Spigot Type)
  Breakout Spanner for Driver
4
Stabilizer
Spare Parts for Driver
6
Short Cross Pin
7
Long Cross Pin
8
Solid Retention Pin
9
Spirol Pin
Drive Shoe and Lead Casing Dimensions

Drive Shoe and Lead Casing Dimensions table