AC Distributor GooglePlus
Under Construction We are currently redesigning our website to be more mobile device friendly. You may encounter various page configurations as you move throughout the site. Thank you for your patience as we always strive to give you the best website experience.

Float Dock Accessories (FAT)


Pump Pond Water Free of Debris with Float Dock Strainer


"The Original"

"The Original" float dock strainer

"The Original" Float Dock strainer is a valuable piece of equipment that can save the day in many water supply situations. Float Dock lets you use the water in farm ponds or streams, both shallow and deep, and with Type A tanks. Because it operates below scum and debris and above sand and muck, it screens out the materials that wear out impellers, packing, and bearings. Since Float Dock strainers are self-leveling, there are no whirlpools or suction loss. Each unit is fully guaranteed.


Float Dock drafts in as little as 5 inch of water at pump's rated capacity:


  • In deep water, Flock Dock drafts clean water below surface
  • In less than 30 seconds strainer can be removed for use in cisterns
  • Use as a "Box Strainer"

Barrel only (aluminum)
Deep draft - barrel only
Float only (polyethylene)
Shallow draft - float only
Deep Draft - Strainer drafts from a few inches below surface where water is cleanest. Note how hose weight tilts strainer position while float remains level.   Shallow Draft - Note how Float Dock drafts in as little as 5 inches depth without any whirlpool or loss of suction.

Construction Features:


  • New lightweight materials
  • Made of aluminum and polyethylene
  • Lightweight long handle coupling with standard N.S. or I.P. threads
  • Valve available
  • Clapper and camlocks available


Float Only
Strainer Only
Ship Weights
2-1/2 "
5" x 15" x 18-1/2"
4" x 6" x 14"
16 lbs.
5" x 15" x 18-1/2"
4" x 6" x 14"
16 lbs.
7" x 21" x 26-1/2"
7" x 10" x 18-1/2"
31 lbs.
7" x 21-1/2" x 26-1/2"
6" x 8" x 18-1/2"
32 lbs.
7" x 21-1/2" x 26-1/2"
6" x 8" x 18-1/2"
32 lbs.
7" x 21-1/2" x 26-1/2"
7" x 16" x 18-1/2"
33 lbs.

Accessory for Strainers:


Lightweight carrying rack can be mounted on a running board or inside a compartment. There are two sizes. Small is for 2-1/2", and 3" Float Dock strainers and all low-flow strainers. Large is for 4", 4-1/2", 5", and 6" Float Dock strainers and low -flow strainers. Small and large sizes.

Carrying rack

Barrel Strainer:


This strainer is constructed from high tensile strength aluminum alloy and is designed to allow full pumping capacity. Attaches easily to any type of suction hose with standard NST FEMALE threads. Storz connection available. Sizes range from 1.5 inches to 6 inches.

Barrel strainer


Supply Line Holder:


NST supply line holder
2-1/2" NST shown
Storz supply line holder
5" Storz shown



  • 2-1/2", 3", and 4"

  • Dbl. 2-1/2" and Dbl. 3"

  • 2-1/2" and 3" combination

  • Storz and Camlocks available


Couples supply hose securely to any portable water tank:


  • Added filling source
  • Minimizes waste and turbulence
  • Frees up manpower for other important duties
  • Aluminum casting
  • Single (SLHS) rated at 200 psi at pump, Double (SLHD) rated at 400 psi at pump
  • Corner mounts available