Kwik Klamps (Well Pipe Clamps) Now available in 3 sizes

• All steel construction but lightweight - only 14 lbs.
• Easy to operate, over center locking of jaws when downward pressure is applied to lever.
• KWIK KLAMP allows workers to bring pipe joint up to an easy working level.
• Equipped with serrated and hardened replaceable jaws.
• Excellent holding capability with load tests over 3500 lbs.
• Designed to hold pipes 1 " through 2"  (2.375"OD) PVC, stainless, and galvanized.
• Safety pin to prevent accidental unclamping.
• KWIK KLAMP is one of the safest time-saving tools you will ever own.

KWIK KLAMP1 holding 2" stainless steel pipe
on 8" casing. The wide klamp base fitson
many casing sizes.

Easy one hand operation. Size adjustment
and tension bolt located inside of front
jaw protected from dirt and water.

• Main body is constructed of 2" and 2 1/2" 1/4" wall steel tube.
• Easy to operate, over center locking of jaws when downward pressure is applied to a 19" long lever handle.
• 1/2" safety pin used to prevent accidental unclamping.
• KWIK KLAMP2 allows workers to bring pipe or drill joint up to an easy working level.
• The tool weighs only 30 lbs. and is 20" long x 7 1/2" wide.
• Jaws are equipped with 16 carbide-tipped grippers.
• Excellent holding capability, with load tests done over 7,000 lbs.
• Designed to hold pipes 2 1/2", 3" and 4" PVC, HDPE, stainless, and galvanized steel.
• KWIK KLAMP is one of the safest, time-saving tools you will ever own.

Click here for dimensions

• Additional (4) spacers can be purchased to accommodate 4 1/2" pipe.
• Spacers will be placed on the middle two jaw pads on each side.
  

• Especially designed for holding 2" and 2 1/2" pipe using the KWIK KLAMP 2.
• Increased holding capacity.
• Set of 4 serrated hardened jaws with bolts.

* * * The NEW Kwik Klamp "3" for holding 6" PVC pipe. * * *

KWIK KLAMP 3

The heavy duty KWIK KLAMP 3 is designed to hold 6" PVC pipe. This Klamp can also hold 5" pipe with an additional jaw set. The KWIK KLAMP 3 is very similar to the KWIK KLAMP 2, which is for pipe sizes 2 1/2" through 4". The Kwik Klamp has been used worldwide by environmental drillers, pump installers, well servicemen, and water well drillers.

• Main body is constructed of 2" and 2 1/2" 1/4" wall steel tube.
• Easy to operate, over center locking of jaws when downward pressure is applied to a 19" long lever handle.
• 1/2" safety pin used to prevent accidental unclamping.
• KWIK KLAMP 3 allows workers to bring pipe or drill joint up to an easy working level.
• The tool weighs only 37 lbs. and is 20" long x 7 1/2" wide.
• Jaws are equipped with 20 carbide-tipped grippers (3/8-16x1/2).
• Excellent holding capability, with load tests done over 7,000 lbs.
• Designed to hold 6" PVC or HDPE pipe.
• KWIK KLAMP is one of the safest, time-saving tools you will ever own.

Kwik Klamp 3 for 5" PVC Pipe