Missile LXQ Series - LXQR6000 IR360 Shank

Missile LXQ IR360 diagram

Features:
  • Easy to service
  • Special heat-treated alloy piston for long life, Rockwell hardness 60
  • Minimum loss of performance when injecting foam or water

Item # Description Part #
1 Back Head LQ6001
2 Back Head O-Ring LQ6002
3 Choke  
4 Air Check Valve LQ6004
5 Air Check Valve Spring LQ6005
6 Buffering Washer (Steel) LQ6006
7 Make-Up Rubber (Buffering) LQ6007
8 Air Distributor LQ6008
9 Air Distributor O-Ring LQ6009
10 Cylinder LQR6010
11 Wear Sleeve LQR6011
12 Piston LQR6012
13 Piston Stop Ring LQ6013
14 Bearing O-Ring LQR6015
15 Bearing LQR6014
16 Bit Retaining O-Ring LQR6016
17 Bit Retaining LQR6017
18 Chuck (Drive Sub) LQR6019
  Choke Plug Kit LXQ1000
  O-Ring Kit LQ6022

Specifications


Length (w/o drill bit) 48.7"
Outside Diameter 5.413"
Weight (w/o bit) 226.66 lbs.
Cylinder Bore 4.268"
Piston O.D. 4.263"
Piston Stroke 4.527"
Piston Weight 45.81 lbs.
Hole Sizes 6" - 8"
Air Pressure Consumption 100 psi - 400 psi
Wrench Size A/F 3.968"
Connection Std. 3 1/2" API Reg Pin

Air Consumption Chart


PSI 150 200 250 300 350 400
CFM with blank choke 350 510 665 825 990 -
with 1/8" choke 385 570 735 915 1,090 -
with 1/4" choke 440 650 830 1,009 1,190 -

All Hammers come Fitted with blank Choke located in the Air Check Valve




Lubrication

G-Force Series Hammers are precision-made tools and should be treated as such. Only the highest quality lubrication should be used and a constant flow of oil must be maintained at all times. Recommended lubrication amount 1/3 Pint per 100 cfm per hour.

Recommended Grades of Lubricant

ESSO
MATEX
CASTROL
SHELL
MOBILE
AROX EP 150
RDO 302
RD OIL DP 100
AIR TOOL OIL 2 A 320
ALMO NO. 5
Heavy duty oil is recommended for all year-round use, in particular where air supply to the hammer is at high temperature. If lighter grade oil is required due to very low ambient temperatures, amount of oil being used should be increased by 30 percent.

Recommended Pull Down

Minimum @ 100 psi - 1500 lbs. Maximum @ 350 psi - 4000 lbs.

Missile Warranty will be voided by the following:


Welding on Wear Sleeve.
Heating Case with a Torch.
Gripping Wrenches across Threads.
Hammering on Casing.

READ WARNING LABEL ATTACHED TO HAMMER.