PVC Casing Elevators
Elevators for Belled End Pipe


1" and 1 1/4" Pipe Elevators


- Fast and safe way to install bell end well casing.
- Lightweight elevators constructed of formed and welded 1/4" steel.
- 1/2" lock pin and hinges.
- All elevators come with zinc-plated high test, grade 43 chain.
- 1/4" chains is 2000 lbs. test on 1" thru 6" elevators.
- 5/16" chains is 3000 lbs. test on 8" thru 16" elevators.
- Sold in pairs; one to hold, one to lift.
- Safer than ropes, cables, or loop chains.
Heavy Duty Precision Fit PVC Casing Elevators


- Fast and safe way to install bell end well casing.
- Elevators constructed of 1/2" wall DOM steel tube
- DOM steel tube is machined to pipe specific OD, with a chamfer added to the top for the pipe to bell transition.
- 3/4" pins and hinges used on both sides.
- Insert lock pin is machined with a taper for easy installation if pipe is out of round.
- All elevators come with 2 zinc-plated high test, grade 43 chains.
- 5/16" chains, 3000 lbs. test.
- Sold in pairs; one to hold and one to lift .
- Safer than ropes, cables, or loop chains.



Flush Joint Clamps for PVC Pipe


- Developed for the environmental industry to hold flush joint pipe safely.
- Constructed of formed and welded 1/4" steel.
- Light weight and easy to handle.
- Weight of tool: 4", 4 1/2", 5", 6"-15 lbs; 8"-25 lbs.
- One tee bolt tensioner used to apply pressure around pipe with cupped set screws for grippers.
- Load tested to over 3000 lbs.
Elevator Sizes - Labeled by Pipe Size |
|||
PVC Pipe Size | PVC Pipe Size | PVC Pipe Size | PVC Pipe Size |
1/2" (.84" OD) | 2" (2.375" OD) | 5" (5.563" OD) | 12" (12.75" OD) |
3/4" (1.05" OD) | 2 1/2" (2.875" OD) | 6" (6.625" OD) | 14" or 16" |
1" (1.315" OD) | 3" (3.5" OD) | 6 1/4" (6.9" OD) | 20" |
1 1/4" (1.660" OD) | 4" (4.5" OD) | 8" (8.625" OD) | |
1 1/2" (1.9" OD) | 4 1/2" (5" OD) | 10" (10.75" OD) |