Missile LXQ Series - LXQM15000 SD15 Shank

Missile LXQ SD15 diagram

Features:
  • Easy to service
  • Special heat-treated alloy piston for long life, Rockwell hardness 60
  • Minimum loss of performance when injecting foam or water

Item # Description Part #
1 Back Head LQ1601
2 Back Head O-Ring LQ1602
3 Back Head Washer LQ1603
4 Choke LQ1604
5 Air Check Valve LQ1605
6 Air Check Valve Spring LQ1606
7 Make-Up Washer (Buffering) LQ1607
8 Make-Up Rubber (Buffering) LQ1608
9 Air Distributor LQ1609
10 Air Distributor O-Ring LQ1610
11 Cylinder LQ1611
12 Wear Sleeve LQ1612
13 Piston LQ1613
14 Piston Stop Ring LQ1614
15 Bit Retaining O-Ring LQ1615
16 Bit Retaining Ring LQ1616
17 Guide Sleeve LQ1617
18 Chuck Washer LQ1618
19 Chuck LQ1619
20 Drive Pin LQ1620
  Choke Plug Kit LQ1629
  O-Ring Kit LQ1630

Specifications


Length (w/o drill bit) 73.19"
Outside Diameter 14.17"
Weight (w/o bit) 2,385 lbs.
Cylinder Bore 11.42"
Piston O.D. 11.41"
Piston Stroke 4.92"
Piston Weight 444.5 lbs.
Hole Sizes 17 1/2" - 22"
Air Pressure Consumption 100 psi - 250 psi
Wrench Size -
Connection Std. 8 5/8" API Reg Pin

Air Consumption Chart


PSI 100 150 200 250 300 350
CFM with blank choke 1,150 1,700 2,280 2,850 - -
with 1/8" choke - - - - - -
with 1/4" choke - - - - - -

All Hammers come Fitted with blank Choke located in the Air Check Valve




Lubrication

G-Force Series Hammers are precision-made tools and should be treated as such. Only the highest quality lubrication should be used and a constant flow of oil must be maintained at all times. Recommended lubrication amount 1/3 Pint per 100 cfm per hour.

Recommended Grades of Lubricant

ESSO
MATEX
CASTROL
SHELL
MOBILE
AROX EP 150
RDO 302
RD OIL DP 100
AIR TOOL OIL 2 A 320
ALMO NO. 5
Heavy duty oil is recommended for all year-round use, in particular where air supply to the hammer is at high temperature. If lighter grade oil is required due to very low ambient temperatures, amount of oil being used should be increased by 30 percent.

Recommended Pull Down

Minimum @ 100 psi - 0000 lbs. Maximum @ 350 psi - 0000 lbs.

Missile Warranty will be voided by the following:


Welding on Wear Sleeve.
Heating Case with a Torch.
Gripping Wrenches across Threads.
Hammering on Casing.

READ WARNING LABEL ATTACHED TO HAMMER.