The Kwik Klamp is a tool that helps you, (well drillers, pump installers, well servicemen, and environmental drillers) not lose your well pipe down the hole. The Kwik Klamp has been around for more than 30 years and is very popular worldwide. It can hold the pipe at comfortable working level and comes in four different sizes.
This is one of the safest, time-saving tools you will ever own.
Kwik Klamp 1 - 1" through 2" pope
Kwik Klamp 2 - 2 1/2", 3" and 4" pipe
Kwik Klamp 3 - 6" PVC or HDPE pipe
Kwik Klamp 4 - 3/4", 1 ", 1 1/4", 1 1/2" or 2" pipe
1 " through 2" PVC, stainless, and galvanized. KWIK KLAMP 1
This is a lightweight, steel tool that only 14 pounds. It’s easy to use, and locks in place when you push down on the lever handle. The KWIK KLAMP helps you bring well pipes to a good height to work on. It has harden, replaceable jaws that can hold over 3500 pounds. Sized for 1″ to 2″pipes made of PVC, stainless steel, or galvanized metal. There is also a safety pin to keep the tool from accidentally unlatching.
2 1/2", 3" and 4" PVC, HDPE, stainless, and galvanized steel. KWIK KLAMP 2
The KWIK KLAMP 2 holds larger pipes, 2 1/2”, 3” and 4” and is useful for water well and environmental drillers, pump installers, and well servicemen. Made of steel and only weighs 30lbs. It’s 20” long x 7 1/2” wide. The jaws include 16 carbide-tipped grippers and can hold up to 7,000 lbs. A 1/2″ safety pin prevents accidental unclamping and allows you to work on the pipe or drill joint at a comfortable level. The KWIK KLAMP 2 is an enlarged version of KWIK KLAMP 1.
6" PVC or HDPE pipe. KWIK KLAMP 3
The KWIK KLAMP 3 holds 6″ PVC or HDPE pipe, with an optional jaw set to hold 5″ pipe. It’s made of strong steel and has been used by drillers and well workers all around the world. It is easy to use, with a lever handle that locks the jaws in place. A safety pin prevents accidental unclamping. It’s small and lightweight at 37 lbs, and the jaws have carbide-tipped grippers for a secure hold up to 7,000 lbs.
3/4", 1 ", 1 1/4", 1 1/2" or 2" PVC, HDPE, rolled PE & galvanized pipe. KWIL KLAMP 4
The KWIK KLAMP 4 helps you save time and is safe to use. You can use it on PVC, HDPE, rolled PE & galvanized pipes, but not on bare steel drill rods. It has a safety pin to avoid accidental opening and is very easy to use with one hand. The size adjustment and tension bolt are inside the front jaw to protect them from dirt and water. You can also order it with interchangeable jaws to fit your specific needs. It comes in five sizes from 3/4″ to 2″, and the serrations on the jaws are specially designed to increase holding capacity and reduce pipe distortion. The jaws are made from high-grade carbon steel and heat treated for strength and long life. It has a larger platform base for stability and works better on larger diameter casing.